Router Confreg 0x2142
CLI Guru - Cisco Eğitim ve Danışmanlık Merkezi |

+ Konuyu Cevapla
Toplam 3 sonuçtan 1 ile 3 arasındakiler gösteriliyor.
Router Confreg 0x2142

Selamlar, Routerın config registerindan dolayi yapmıs oldugun config, her resetlemende ucuyor. Rommon moda aciliyorsa, sunu yaparsan duzelir. rommon 1 > confreg 0x2142 rommon 1 >i Bu islemden sonra router normal

  1. #1
    Hilmiye Balcik Guest

    Standart Router Confreg 0x2142

    Selamlar,
    Routerın config registerindan dolayi yapmıs oldugun config, her resetlemende ucuyor. Rommon moda aciliyorsa, sunu yaparsan duzelir.

    rommon 1 > confreg 0x2142
    rommon 1 >i
    Bu islemden sonra router normal olarak acilacaktir. Router flashdan normal olarak acildiktan sonra da su islemi yapman gerekir.

    Router#conf t
    Router (config)# config-register 0x2102
    Router# wr
    Router# reload


    Bu asamadan sonra router yeniden acildiginda normale dönecektir. Sh ver komutu ile config registerı kontrol ettiginde 0x2102'yi gormen gerekir.

    Kolay Gelsin,
    Hilmiye


    -----Original Message-----
    From: [email][email protected][/email] [mailto:[email protected]] On Behalf Of tolgaunsal74
    Sent: Thursday, November 10, 2005 5:52 PM
    To: [email][email protected][/email]
    Subject: [cisco-ttl] cisco 2600 sorunu

    cnna kursuna yeni basladim ve sirkette bosta duran 2600 ile
    denemeler yapmaktayim
    router a þifre veriyorum ip veriyorum kaydediyorum fakat
    router kapatip actigimde ayarlar sifirlaniyor
    ve biseyler yaptim bende anlamadim kapatip acinca su moda gecti
    acaba ne yapmam gerekli ??

    System Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE (fc1)
    Copyright (c) 1999 by cisco Systems, Inc.
    TAC:Home:SW:IOS:Specials for info
    C2600 platform with 32768 Kbytes of main memory

    loadprog: bad file magic number: 0x0
    boot: cannot load "flash:"

    System Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE (fc1)
    Copyright (c) 1999 by cisco Systems, Inc.
    TAC:Home:SW:IOS:Specials for info
    C2600 platform with 32768 Kbytes of main memory

    loadprog: bad file magic number: 0x0
    boot: cannot load "flash:"

    System Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE (fc1)
    Copyright (c) 1999 by cisco Systems, Inc.
    TAC:Home:SW:IOS:Specials for info
    C2600 platform with 32768 Kbytes of main memory

    rommon 1 >

  2. #2
    tolga ünsal Guest

    Standart RE: cisco 2600 sorunu

    merhaba
    dediklerinizi yaptim ama normal mod da acilmiyor asagisa yapistiyorum :
    System Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE (fc1)
    Copyright (c) 1999 by cisco Systems, Inc.
    TAC:Home:SW:IOS:Specials for info
    C2600 platform with 32768 Kbytes of main memory
    loadprog: bad file magic number: 0x0
    boot: cannot load "flash:"
    System Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE (fc1)
    Copyright (c) 1999 by cisco Systems, Inc.
    TAC:Home:SW:IOS:Specials for info
    C2600 platform with 32768 Kbytes of main memory
    loadprog: bad file magic number: 0x0
    boot: cannot load "flash:"
    System Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE (fc1)
    Copyright (c) 1999 by cisco Systems, Inc.
    TAC:Home:SW:IOS:Specials for info
    C2600 platform with 32768 Kbytes of main memory
    rommon 1 > confreg 0x2142

    rommon 2 > i
    System Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE (fc1)
    Copyright (c) 1999 by cisco Systems, Inc.
    TAC:Home:SW:IOS:Specials for info
    C2600 platform with 32768 Kbytes of main memory
    loadprog: bad file magic number: 0x0
    boot: cannot load "flash:"
    System Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE (fc1)
    Copyright (c) 1999 by cisco Systems, Inc.
    TAC:Home:SW:IOS:Specials for info
    C2600 platform with 32768 Kbytes of main memory
    loadprog: bad file magic number: 0x0
    boot: cannot load "flash:"
    System Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE (fc1)
    Copyright (c) 1999 by cisco Systems, Inc.
    TAC:Home:SW:IOS:Specials for info
    C2600 platform with 32768 Kbytes of main memory
    rommon 1 >




    Hilmiye Balcik <[email protected]> wrote:
    Selamlar,
    Routerın config registerindan dolayi yapmıs oldugun config, her resetlemende ucuyor. Rommon moda aciliyorsa, sunu yaparsan duzelir.

    rommon 1 > confreg 0x2142
    rommon 1 >i
    Bu islemden sonra router normal olarak acilacaktir. Router flashdan normal olarak acildiktan sonra da su islemi yapman gerekir.

    Router#conf t
    Router (config)# config-register 0x2102
    Router# wr
    Router# reload


    Bu asamadan sonra router yeniden acildiginda normale dönecektir. Sh ver komutu ile config registerı kontrol ettiginde 0x2102'yi gormen gerekir.

    Kolay Gelsin,
    Hilmiye


    -----Original Message-----
    From: [email][email protected][/email] [mailto:[email protected]] On Behalf Of tolgaunsal74
    Sent: Thursday, November 10, 2005 5:52 PM
    To: [email][email protected][/email]
    Subject: [cisco-ttl] cisco 2600 sorunu

    cnna kursuna yeni basladim ve sirkette bosta duran 2600 ile
    denemeler yapmaktayim
    router a þifre veriyorum ip veriyorum kaydediyorum fakat
    router kapatip actigimde ayarlar sifirlaniyor
    ve biseyler yaptim bende anlamadim kapatip acinca su moda gecti
    acaba ne yapmam gerekli ??

    System Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE (fc1)
    Copyright (c) 1999 by cisco Systems, Inc.
    TAC:Home:SW:IOS:Specials for info
    C2600 platform with 32768 Kbytes of main memory

    loadprog: bad file magic number: 0x0
    boot: cannot load "flash:"

    System Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE (fc1)
    Copyright (c) 1999 by cisco Systems, Inc.
    TAC:Home:SW:IOS:Specials for info
    C2600 platform with 32768 Kbytes of main memory

    loadprog: bad file magic number: 0x0
    boot: cannot load "flash:"

    System Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE (fc1)
    Copyright (c) 1999 by cisco Systems, Inc.
    TAC:Home:SW:IOS:Specials for info
    C2600 platform with 32768 Kbytes of main memory

    rommon 1 >

  3. #3
    Enis Karaarslan Guest

    Standart Re: cisco 2600 sorunu

    flash'dan ios'i alamiyor gorunuyor
    ios'ini XMODEM'le upgrade etmeyi-ya da ayni ios'i yüklemeyi deneyin

    tolga ünsal wrote:
    [color=blue]
    >merhaba
    >dediklerinizi yaptim ama normal mod da acilmiyor asagisa yapistiyorum :
    >System Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE (fc1)
    >Copyright (c) 1999 by cisco Systems, Inc.
    >TAC:Home:SW:IOS:Specials for info
    >C2600 platform with 32768 Kbytes of main memory
    >loadprog: bad file magic number: 0x0
    >boot: cannot load "flash:"
    >System Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE (fc1)
    >Copyright (c) 1999 by cisco Systems, Inc.
    >TAC:Home:SW:IOS:Specials for info
    >C2600 platform with 32768 Kbytes of main memory
    >loadprog: bad file magic number: 0x0
    >boot: cannot load "flash:"
    >System Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE (fc1)
    >Copyright (c) 1999 by cisco Systems, Inc.
    >TAC:Home:SW:IOS:Specials for info
    >C2600 platform with 32768 Kbytes of main memory
    >rommon 1 > confreg 0x2142
    >
    >rommon 2 > i
    >System Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE (fc1)
    >Copyright (c) 1999 by cisco Systems, Inc.
    >TAC:Home:SW:IOS:Specials for info
    >C2600 platform with 32768 Kbytes of main memory
    >loadprog: bad file magic number: 0x0
    >boot: cannot load "flash:"
    >System Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE (fc1)
    >Copyright (c) 1999 by cisco Systems, Inc.
    >TAC:Home:SW:IOS:Specials for info
    >C2600 platform with 32768 Kbytes of main memory
    >loadprog: bad file magic number: 0x0
    >boot: cannot load "flash:"
    >System Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE (fc1)
    >Copyright (c) 1999 by cisco Systems, Inc.
    >TAC:Home:SW:IOS:Specials for info
    >C2600 platform with 32768 Kbytes of main memory
    >rommon 1 >
    >
    >
    >
    >
    >Hilmiye Balcik <[email protected]> wrote:
    >Selamlar,
    >Routerın config registerindan dolayi yapmıs oldugun config, her resetlemende ucuyor. Rommon moda aciliyorsa, sunu yaparsan duzelir.
    >
    >rommon 1 > confreg 0x2142
    >rommon 1 >i
    >Bu islemden sonra router normal olarak acilacaktir. Router flashdan normal olarak acildiktan sonra da su islemi yapman gerekir.
    >
    >Router#conf t
    >Router (config)# config-register 0x2102
    >Router# wr
    >Router# reload
    >
    >
    >Bu asamadan sonra router yeniden acildiginda normale dönecektir. Sh ver komutu ile config registerı kontrol ettiginde 0x2102'yi gormen gerekir.
    >
    >Kolay Gelsin,
    >Hilmiye
    >
    >
    >-----Original Message-----
    >From: [email][email protected][/email] [mailto:[email protected]] On Behalf Of tolgaunsal74
    >Sent: Thursday, November 10, 2005 5:52 PM
    >To: [email][email protected][/email]
    >Subject: [cisco-ttl] cisco 2600 sorunu
    >
    >cnna kursuna yeni basladim ve sirkette bosta duran 2600 ile
    >denemeler yapmaktayim
    >router a þifre veriyorum ip veriyorum kaydediyorum fakat
    >router kapatip actigimde ayarlar sifirlaniyor
    >ve biseyler yaptim bende anlamadim kapatip acinca su moda gecti
    >acaba ne yapmam gerekli ??
    >
    >System Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE (fc1)
    >Copyright (c) 1999 by cisco Systems, Inc.
    >TAC:Home:SW:IOS:Specials for info
    >C2600 platform with 32768 Kbytes of main memory
    >
    >loadprog: bad file magic number: 0x0
    >boot: cannot load "flash:"
    >
    >System Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE (fc1)
    >Copyright (c) 1999 by cisco Systems, Inc.
    >TAC:Home:SW:IOS:Specials for info
    >C2600 platform with 32768 Kbytes of main memory
    >
    >loadprog: bad file magic number: 0x0
    >boot: cannot load "flash:"
    >
    >System Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE (fc1)
    >Copyright (c) 1999 by cisco Systems, Inc.
    >TAC:Home:SW:IOS:Specials for info
    >C2600 platform with 32768 Kbytes of main memory
    >
    >rommon 1 >
    >

+ Konuyu Cevapla

Bu Konuyu Paylaşın !

Bu Konuyu Paylaşın !

Yetkileriniz

  • Konu Acma Yetkiniz Yok
  • Cevap Yazma Yetkiniz Yok
  • Eklenti Yükleme Yetkiniz Yok
  • Mesajınızı Değiştirme Yetkiniz Yok