Aruba AP-305
CLI Guru - Cisco Eğitim ve Danışmanlık Merkezi |

+ Konuyu Cevapla
Toplam 3 sonuçtan 1 ile 3 arasındakiler gösteriliyor.
Aruba AP-305

Hi, We are facing a problem about Aruba AP-305 on Cisco switches for 2 weeks , is not resolved yet. Let me know you clarifications about details, 1. When use

  1. #1
    ilkerkorkmazer isimli Üye şimdilik offline konumundadır Junior Member
    Üyelik tarihi
    Mar 2017
    Mesajlar
    2

    Standart Aruba AP-305

    Hi,

    We are facing a problem about Aruba AP-305 on Cisco switches for 2 weeks , is not resolved yet. Let me know you clarifications about details,
    1. When use the Cisco ws-2960x-48fps-l ,AP was working as low performance although it is giving error message by red light. Low performance means download and upload speeds are decreasing so a few members can connect by AP, not alot.
    2. Then we are trying same scenarios for Cisco 2960s-48fps –l but faced that same scenario.
    3. After aboves we decided that PowerDsine 3501G injector should be used, but it seems that the bad scenario resumed.
    4. Finally we have changed injector and used Microsemi 9001GR instead of PowerDsine 3501G , AP has worked fine which it means high performance and came accross Green light on it.



    As an altenative tests, it is working fine on AVAYA and Huawei Switches without any injectors.
    we do not to want to use injectors, please help me how can i fix it?

    i also increased power inline static 30W but didn't fix it.

  2. #2
    ydev isimli Üye şimdilik offline konumundadır Member
    Üyelik tarihi
    Dec 2013
    Bulunduğu yer
    istanbul
    Mesajlar
    43

    Standart

    Hello

    Switch poe + plus model you are using
    You can check out the link below
    If the AccesPoints are over 15.4W you should get the poe plus model

    Http://www.cisco.com/c/en/us/product...78-728232.html

    As in the following table

    Also the problem may not originate from the switch switch 740w poe but you are not using the plus model
    You should buy a plus model for it

    Also when you login with switch consol will tell you the errors in the debug output
    Let's help you share with us




    Table 8. 2960-X PoE and PoE+ Power Capacity

    Switch Model


    Maximum Number of PoE+ (IEEE 802.3at) Ports*


    Maximum Number of PoE (IEEE 802.3af) Ports*


    Available PoE Power (Single PS Source)

    Cisco Catalyst 2960X-48FPD-L


    24 ports up to 30W


    48 ports up to 15.4W


    740W

    Cisco Catalyst 2960X-48LPD-L


    12 ports up to 30W


    24 ports up to 15.4W


    370W

    Cisco Catalyst 2960X-24PD-L


    12 ports up to 30W


    24 ports up to 15.4W


    370W

    Cisco Catalyst 2960X-48FPS-L


    24 ports up to 30W


    48 ports up to 15.4W


    740W

    Cisco Catalyst 2960X-48LPS-L


    12 ports up to 30W


    24 ports up to 15.4W


    370W

    Cisco Catalyst 2960X-24PS-L


    12 ports up to 30W


    24 ports up to 15.4W


    370W

    Cisco Catalyst 2960X-24PSQ-L


    3 ports up to 30W


    7 ports up to 15.4W


    110W

    Cisco Catalyst 2960XR-48FPD-I


    24 ports up to 30W


    48 ports up to 15.4W


    740W

    Cisco Catalyst 2960XR-48LPD-I


    12 ports up to 30W


    24 ports up to 15.4W


    370W

    Cisco Catalyst 2960XR-24PD-I


    12 ports up to 30W


    24 ports up to 15.4W


    370W

    Cisco Catalyst 2960XR-48FPS-I


    24 ports up to 30W


    48 ports up to 15.4W


    740W

    Cisco Catalyst 2960XR-48LPS-I


    12 ports up to 30W


    24 ports up to 15.4W


    370W

    Cisco Catalyst 2960XR-24PS-I


    12 ports up to 30W


    24 ports up to 15.4W


    370W

  3. #3
    ilkerkorkmazer isimli Üye şimdilik offline konumundadır Junior Member
    Üyelik tarihi
    Mar 2017
    Mesajlar
    2

    Standart aruba

    thank you so much. it is resolved by your direction. in additionally lldp run should have been done.

+ Konuyu Cevapla

Bu Konuyu Paylaşın !

Bu Konuyu Paylaşın !

Yetkileriniz

  • Konu Acma Yetkiniz Yok
  • Cevap Yazma Yetkiniz Yok
  • Eklenti Yükleme Yetkiniz Yok
  • Mesajınızı Değiştirme Yetkiniz Yok