teamviewer ile gelebilirmisin özelden yazayım sana idmi.
![]() | | |
teamviewer ile gelebilirmisin özelden yazayım sana idmi.
teamviewer ile gelebilirmisin özelden yazayım sana idmi.
Tmm eve gidicem hallederiz.
r(config) #ip dhcp relay information trust-all
ve service dhcp'de dene bakalım sen![]()
bu komutu uyguladım.
egitim_router#show ip dhcp server statistics
Memory usage 23530
Address pools 1
Database agents 0
Automatic bindings 0
Manual bindings 0
Expired bindings 0
Malformed messages 0
Secure arp entries 0
Message Received
BOOTREQUEST 0
DHCPDISCOVER 53
DHCPREQUEST 0
DHCPDECLINE 0
DHCPRELEASE 0
DHCPINFORM 0
Message Sent
BOOTREPLY 0
DHCPOFFER 0
DHCPACK 0
DHCPNAK 0
egitim_router#
Cisco IOS IP and IP Routing Command Reference, Release 12.1 - DHCP Commands
ip dhcp excluded-address := To specify IP addresses that a Cisco IOS Dynamic Host Configuration Protocol (DHCP) Server should not assign to DHCP clients, use the ip dhcp excluded-address global configuration command. To remove the excluded IP addresses, use the no form of this command.
Su satirlar yerine:
ip dhcp excluded-address 192.168.2.2 255.255.255.0
ip dhcp excluded-address 192.168.2.1 255.255.255.0
--
ip dhcp excluded-address 192.168.2.1
sonra da pc de "ipconfig /renew" denermisiniz?
Hic olmadi, wireshark calistirin, yeniden "ipconfig /renew" yapin, ne geliyor ne gidiyor paketleri sniffen edip buraya koyun.
Problem has been resolved![]()
!
ip dhcp pool Network
network 10.49.17.0 255.255.255.192
dns-server 213.74.0.1 213.74.1.1
default-router 10.49.17.1
lease 6
!
interface Vlan1
ip address 10.49.17.1 255.255.255.192
ip virtual-reassembly in
ip tcp adjust-mss 1452
!
örneği işe yarayacaktır
Bu Konuyu Paylaşın !