Cisco Router 1721 ile NAT Konfigurasyonu ( Network Address Translation )

[uaydinli]

Arkadaslar nat yaparken kafam karıştı iki farklı internet bağlantım var ikisinin arasında track yapmak istiyorum.
Asagidaki kofigrasyonu kullandım ama lokaldeki bilgisayarlarım internete çıkamıyor.
1. sorum :
Bu konfigrasyonla bilgisayarlarım nasıl inernete çıkar.

!
version 12.4
no service pad
service tcp-keepalives-in
service tcp-keepalives-out
service timestamps debug datetime msec localtime show-timezone
service timestamps log datetime msec localtime show-timezone
service password-encryption
service sequence-numbers
!
hostname Mahmut
!
boot-start-marker
boot-end-marker
!
security authentication failure rate 3 log
security passwords min-length 6
logging buffered 51200 debugging
enable secret
!
aaa new-model
!
!
aaa authentication login default local
aaa authorization exec default local
!
aaa session-id common
clock timezone GMT+2 2
clock summer-time GMT+2 date Mar 26 2007 2:00 Oct 29 2007 2:00
no ip source-route
!
!
!
!
ip cef
ip name-server 4.2.2.2
ip name-server 4.2.2.1
no ip bootp server
ip sla monitor 1
type echo protocol ipIcmpEcho 4.2.2.2 source-interface FastEthernet0
timeout 2000
frequency 5
ip sla monitor schedule 1 life forever start-time now
ip sla monitor 2
type echo protocol ipIcmpEcho 4.2.2.2 source-interface Ethernet1
timeout 2000
frequency 5
ip sla monitor schedule 2 life forever start-time now
!
username privilege 15 secret
!
!
ip tcp synwait-time 10
ip ftp username
ip ftp password
!
track 1 rtr 1 reachability
!
track 2 rtr 2 reachability
!
!
interface Loopback0
no ip address
!
interface Ethernet0
ip address 192.168.4.1 255.255.255.0
ip nat inside
ip virtual-reassembly
ip route-cache flow
half-duplex
!
interface Ethernet1
ip address 192.168.1.44 255.255.255.240
ip nat outside
ip virtual-reassembly
ip route-cache flow
half-duplex
!
interface FastEthernet0
ip address 10.10.6.162 255.255.255.240
ip nat outside
ip virtual-reassembly
ip route-cache flow
speed auto
!
ip forward-protocol nd
ip route 0.0.0.0 0.0.0.0 FastEthernet0 20 name Line1 track 1
ip route 0.0.0.0 0.0.0.0 Ethernet1 30 name Line2 track 2
ip http server
ip http access-class 99
ip http authentication local
ip http timeout-policy idle 60 life 86400 requests 10000
ip flow-top-talkers
top 10
sort-by bytes
!
ip nat inside source list 2 interface FastEthernet0 overload
ip nat inside source list 2 interface Ethernet 0 overload
!
access-list 1 remark UZAK
access-list 1 permit 88.45.45.12 255.255.255.255
access-list 1 deny any log
access-list 2 remark NAT
access-list 2 permit ip any 192.168.1.0 0.0.0.255
snmp-server community mahmut RO 99
no cdp run
!
control-plane
!
banner login ^CCCC
************************************************** *
* *
* mahmutinsaat@gmail.com *
* *
************************************************** *
^C
!
line con 0
transport output telnet
line aux 0
transport output telnet
line vty 0 4
access-class 1 in
!
scheduler max-task-time 5000
scheduler allocate 4000 1000
scheduler interval 500
end

2. sorum :
Acaba int ethernet 1 icin 212.4.23.45 255.255.255.240 ip adresimi mi kullansam veya kullanırsam neler değistirmem gerekir.

yardımlarınız için teşekkürler.
Umut...