Cisco 6500 Switch (WS-X6K-SUP1A-2GE) Modül
CLI Guru - Cisco Eğitim ve Danışmanlık Merkezi |

+ Konuyu Cevapla
Toplam 7 sonuçtan 1 ile 7 arasındakiler gösteriliyor.
Cisco 6500 Switch (WS-X6K-SUP1A-2GE) Modül

Selam. Catalyst 6500 seri switch üzerinde MSFC (sw-x6k-sup1a-2ge) modulu mevcut. Bu modul kendi kendini restart yapıyor. Console da Hata mesajı olarak : (%SYS-5-MOD_OK: Module 15 is online) gözüküyor. Loglara baktığımda

  1. #1
    M. Fatih ULUÇAM Guest

    Standart Cisco 6500 Switch (WS-X6K-SUP1A-2GE) Modül

    Selam.
    Catalyst 6500 seri switch üzerinde MSFC (sw-x6k-sup1a-2ge) modulu mevcut.
    Bu modul kendi kendini restart yapıyor.
    Console da Hata mesajı olarak : (%SYS-5-MOD_OK: Module 15 is online)
    gözüküyor.

    Loglara baktığımda da Reset Count da sürekli artış oluyor.

    Switch üzerindeki IOS Version 12.0(5.2)XU

    Hatanın kaynağını bulmam için ne yapmam gerektiği konusunda yardımlarınızı
    bekliyorum.
    Şimdiden teşekkürler.

  2. #2
    Serhat Uslay Guest

    Standart re: Cisco 6500 Switch (WS-X6K-SUP1A-2GE) Modül

    CatOS mi yoksa IOS mi kullaniyorsun switch'de ??
    "sh ver" ciktisini yollarmisin...

    Serhat






    "M. Fatih ULUÇAM" <[email protected]>
    Sent by: [email][email protected][/email]
    04/07/05 04:56 PM
    Please respond to
    [email][email protected][/email]


    To
    [email][email protected][/email]
    cc

    Subject
    [cisco-ttl] Catalyst 6500 (sw-x6k-sup1a-2ge) modul






    Selam.
    Catalyst 6500 seri switch üzerinde MSFC (sw-x6k-sup1a-2ge) modulu mevcut.
    Bu modul kendi kendini restart yapıyor.
    Console da Hata mesajı olarak : (%SYS-5-MOD_OK: Module 15 is online)
    gözüküyor.

    Loglara baktığımda da Reset Count da sürekli artış oluyor.

    Switch üzerindeki IOS Version 12.0(5.2)XU

    Hatanın kaynağını bulmam için ne yapmam gerektiği konusunda yardımlarınızı
    bekliyorum.
    Şimdiden teşekkürler.

  3. #3
    M.Fatih ULUÇAM Guest

    Standart re: Cisco 6500 Switch (WS-X6K-SUP1A-2GE) Modül

    sh version çıktısı.

    WS-C6006 Software, Version NmpSW: 5.5(1)
    Copyright (c) 1995-2000 by Cisco Systems
    NMP S/W compiled on Jun 8 2000, 21:09:45

    System Bootstrap Version: 5.3(1)

    Hardware Version: 2.0 Model: WS-C6006 Serial #: TBA04510859

    Mod Port Model Serial # Versions
    --- ---- ------------------- -----------
    --------------------------------------
    1 2 WS-X6K-SUP1A-2GE SAD05020DAT Hw : 7.0
    Fw : 5.3(1)
    Fw1: 5.4(2)
    Sw : 5.5(1)
    Sw1: 5.5(1)
    L3 Switching Engine SAD05020F26 Hw : 1.1
    3 16 WS-X6416-GBIC SAD043609TJ Hw : 1.2
    Fw : 5.4(2)
    Sw : 5.5(1)
    4 48 WS-X6348-RJ-45 SAL044111CT Hw : 1.4
    Fw : 5.4(2)
    Sw : 5.5(1)
    15 1 WS-F6K-MSFC2 SAD05020HPZ Hw : 1.1
    Fw : 12.1(2)E,
    Sw : 12.1(2)E,

    DRAM FLASH NVRAM
    Module Total Used Free Total Used Free Total Used Free
    ------ ------- ------- ------- ------- ------- ------- ----- ----- -----
    1 65408K 39052K 26356K 16384K 6925K 9459K 512K 231K 281K



    Serhat Uslay yazmış:
    [color=blue]
    >CatOS mi yoksa IOS mi kullaniyorsun switch'de ??
    >"sh ver" ciktisini yollarmisin...
    >
    >Serhat
    >
    >
    >
    >
    >
    >
    >"M. Fatih ULUÇAM" <[email protected]>
    >Sent by: [email][email protected][/email]
    >04/07/05 04:56 PM
    >Please respond to
    >[email protected]
    >
    >
    >To
    >[email protected]
    >cc
    >
    >Subject
    >[cisco-ttl] Catalyst 6500 (sw-x6k-sup1a-2ge) modul
    >
    >
    >
    >
    >
    >
    >Selam.
    >Catalyst 6500 seri switch üzerinde MSFC (sw-x6k-sup1a-2ge) modulu mevcut.
    >Bu modul kendi kendini restart yapıyor.
    >Console da Hata mesajı olarak : (%SYS-5-MOD_OK: Module 15 is online)
    >gözüküyor.
    >
    >Loglara baktığımda da Reset Count da sürekli artış oluyor.
    >
    >Switch üzerindeki IOS Version 12.0(5.2)XU
    >
    >Hatanın kaynağını bulmam için ne yapmam gerektiği konusunda yardımlarınızı
    >bekliyorum.
    >Şimdiden teşekkürler.

  4. #4
    Serhat Uslay Guest

    Standart re: Cisco 6500 Switch (WS-X6K-SUP1A-2GE) Modül

    Console'da "switch console" yazarak MSFC consoluna giris yapabilirsin..
    (Buradan hatanin ne oldugunu gorebilmen lazim, console ciktisini yolla
    bakayim..)

  5. #5
    M. Fatih ULUÇAM Guest

    Standart [Fwd: Re: Catalyst 6500 (sw-x6k-sup1a-2ge) modul]

    Selam;
    Console çıktısı:

    %Software-forced reload

    Buffered messages:

    00:00:04: %SYS-5-CONFIG_I: Configured from memory by console
    00:00:04: %SYS-5-RESTART: System restarted --
    Cisco Internetwork Operating System Software
    IOS (tm) MSFC2 Software (C6MSFC2-IS-M), Version 12.1(2)E, EARLY DEPLOYMENT
    RELEA
    SE SOFTWARE (fc1)
    Copyright (c) 1986-2000 by cisco Systems, Inc.
    Compiled Mon 19-Jun-00 22:17 by linda
    00:00:05: %LINK-5-CHANGED: Interface Vlan2, changed state to
    administratively do
    wn
    00:00:05: %LINK-5-CHANGED: Interface Vlan11, changed state to
    administratively d
    own
    00:00:06: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan2, changed
    state t
    o down
    00:00:06: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan11, changed
    state
    to down
    00:00:06: %SCP-5-ONLINE: Module online
    00:00:09: %LINK-3-UPDOWN: Interface Vlan1, changed state to up
    00:00:10: %LINK-3-UPDOWN: Interface Vlan90, changed state to up
    00:00:10: %LINK-3-UPDOWN: Interface Vlan91, changed state to up
    00:00:10: %LINK-3-UPDOWN: Interface Vlan100, changed state to up
    00:00:10: %LINK-3-UPDOWN: Interface Vlan101, changed state to up
    00:00:10: %LINK-3-UPDOWN: Interface Vlan102, changed state to up
    00:00:10: %LINK-3-UPDOWN: Interface Vlan103, changed state to up
    00:00:10: %LINK-3-UPDOWN: Interface Vlan105, changed state to up
    00:00:10: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan1, changed
    state t
    o up
    00:00:11: %LINK-3-UPDOWN: Interface Vlan110, changed state to up
    00:00:11: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan90, changed
    state
    to up
    00:00:11: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan91, changed
    state
    to up
    00:00:11: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan100, changed
    state
    to up
    00:00:11: %LINK-3-UPDOWN: Interface Vlan111, changed state to up
    00:00:11: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan101, changed
    state
    to up
    00:00:11: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan102, changed
    state
    to up
    00:00:11: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan103, changed
    state
    to up
    00:00:11: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan105, changed
    state
    to up
    00:00:12: %LINK-3-UPDOWN: Interface Vlan120, changed state to up
    00:00:12: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan110, changed
    state
    to up
    00:00:12: %LINK-3-UPDOWN: Interface Vlan121, changed state to up
    00:00:12: %LINK-3-UPDOWN: Interface Vlan130, changed state to up
    00:00:12: %LINK-3-UPDOWN: Interface Vlan135, changed state to up
    00:00:12: %LINK-3-UPDOWN: Interface Vlan140, changed state to up
    00:00:12: %LINK-3-UPDOWN: Interface Vlan141, changed state to up
    00:00:12: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan111, changed
    state
    to up
    00:00:12: %LINK-3-UPDOWN: Interface Vlan146, changed state to up
    00:00:12: %LINK-3-UPDOWN: Interface Vlan147, changed state to up
    00:00:12: %LINK-3-UPDOWN: Interface Vlan150, changed state to up
    00:00:12: %LINK-3-UPDOWN: Interface Vlan151, changed state to up
    00:00:12: %LINK-3-UPDOWN: Interface Vlan160, changed state to up
    00:00:13: %LINK-3-UPDOWN: Interface Vlan161, changed state to up
    00:00:13: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan120, changed
    state
    to up
    00:00:13: %LINK-3-UPDOWN: Interface Vlan162, changed state to up
    00:00:13: %LINK-3-UPDOWN: Interface Vlan170, changed state to up
    00:00:13: %LINK-3-UPDOWN: Interface Vlan171, changed state to up
    00:00:13: %LINK-3-UPDOWN: Interface Vlan175, changed state to up
    00:00:13: %LINK-3-UPDOWN: Interface Vlan177, changed state to up
    00:00:13: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan121, changed
    state
    to up
    00:00:13: %LINK-3-UPDOWN: Interface Vlan180, changed state to up
    00:00:13: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan130, changed
    state
    to up
    00:00:13: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan135, changed
    state
    to up
    00:00:13: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan140, changed
    state
    to up
    00:00:13: %LINK-3-UPDOWN: Interface Vlan195, changed state to up
    00:00:13: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan141, changed
    state
    to up
    00:00:13: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan146, changed
    state
    to up
    00:00:13: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan147, changed
    state
    to up
    00:00:13: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan150, changed
    state
    to up
    00:00:13: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan151, changed
    state
    to up
    00:00:13: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan160, changed
    state
    to up
    00:00:14: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan161, changed
    state
    to up
    00:00:14: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan162, changed
    state
    to up
    00:00:14: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan170, changed
    state
    to up
    00:00:14: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan171, changed
    state
    to up
    00:00:14: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan175, changed
    state
    to up
    00:00:14: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan177, changed
    state
    to up
    00:00:14: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan180, changed
    state
    to up
    00:00:14: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan195, changed
    state
    to up
    00:08:36: %SYS-5-CONFIG_I: Configured from console by console
    00:10:33: %SYS-5-CONFIG_I: Configured from console by console
    00:13:36: %SYS-5-CONFIG_I: Configured from console by console
    00:20:26: %SYS-5-CONFIG_I: Configured from console by console
    00:21:27: %SYS-5-CONFIG_I: Configured from console by console
    00:22:15: %SYS-5-CONFIG_I: Configured from console by console
    Queued messages:

    === Flushing messages (15:31:40 UTC Sun May 1 1921) ===

    Buffered messages:

    00:00:04: %SYS-5-CONFIG_I: Configured from memory by console
    00:00:04: %SYS-5-RESTART: System restarted --
    Cisco Internetwork Operating System Software
    IOS (tm) MSFC2 Software (C6MSFC2-IS-M), Version 12.1(2)E, EARLY DEPLOYMENT
    RELEA
    SE SOFTWARE (fc1)
    Copyright (c) 1986-2000 by cisco Systems, Inc.
    Compiled Mon 19-Jun-00 22:17 by linda
    00:00:05: %LINK-5-CHANGED: Interface Vlan2, changed state to
    administratively do
    wn
    00:00:05: %LINK-5-CHANGED: Interface Vlan11, changed state to
    administratively d
    own
    00:00:06: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan2, changed
    state t
    o down
    00:00:06: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan11, changed
    state
    to down
    00:00:06: %SCP-5-ONLINE: Module online
    00:00:09: %LINK-3-UPDOWN: Interface Vlan1, changed state to up
    00:00:10: %LINK-3-UPDOWN: Interface Vlan90, changed state to up
    00:00:10: %LINK-3-UPDOWN: Interface Vlan91, changed state to up
    00:00:10: %LINK-3-UPDOWN: Interface Vlan100, changed state to up
    00:00:10: %LINK-3-UPDOWN: Interface Vlan101, changed state to up
    00:00:10: %LINK-3-UPDOWN: Interface Vlan102, changed state to up
    00:00:10: %LINK-3-UPDOWN: Interface Vlan103, changed state to up
    00:00:10: %LINK-3-UPDOWN: Interface Vlan105, changed state to up
    00:00:10: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan1, changed
    state t
    o up
    00:00:11: %LINK-3-UPDOWN: Interface Vlan110, changed state to up
    00:00:11: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan90, changed
    state
    to up
    00:00:11: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan91, changed
    state
    to up
    00:00:11: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan100, changed
    state
    to up
    00:00:11: %LINK-3-UPDOWN: Interface Vlan111, changed state to up
    00:00:11: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan101, changed
    state
    to up
    00:00:11: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan102, changed
    state
    to up
    00:00:11: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan103, changed
    state
    to up
    00:00:11: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan105, changed
    state
    to up
    00:00:12: %LINK-3-UPDOWN: Interface Vlan120, changed state to up
    00:00:12: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan110, changed
    state
    to up
    00:00:12: %LINK-3-UPDOWN: Interface Vlan121, changed state to up
    00:00:12: %LINK-3-UPDOWN: Interface Vlan130, changed state to up
    00:00:12: %LINK-3-UPDOWN: Interface Vlan135, changed state to up
    00:00:12: %LINK-3-UPDOWN: Interface Vlan140, changed state to up
    00:00:12: %LINK-3-UPDOWN: Interface Vlan141, changed state to up
    00:00:12: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan111, changed
    state
    to up
    00:00:12: %LINK-3-UPDOWN: Interface Vlan146, changed state to up
    00:00:12: %LINK-3-UPDOWN: Interface Vlan147, changed state to up
    00:00:12: %LINK-3-UPDOWN: Interface Vlan150, changed state to up
    00:00:12: %LINK-3-UPDOWN: Interface Vlan151, changed state to up
    00:00:12: %LINK-3-UPDOWN: Interface Vlan160, changed state to up
    00:00:13: %LINK-3-UPDOWN: Interface Vlan161, changed state to up
    00:00:13: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan120, changed
    state
    to up
    00:00:13: %LINK-3-UPDOWN: Interface Vlan162, changed state to up
    00:00:13: %LINK-3-UPDOWN: Interface Vlan170, changed state to up
    00:00:13: %LINK-3-UPDOWN: Interface Vlan171, changed state to up
    00:00:13: %LINK-3-UPDOWN: Interface Vlan175, changed state to up
    00:00:13: %LINK-3-UPDOWN: Interface Vlan177, changed state to up
    00:00:13: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan121, changed
    state
    to up
    00:00:13: %LINK-3-UPDOWN: Interface Vlan180, changed state to up
    00:00:13: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan130, changed
    state
    to up
    00:00:13: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan135, changed
    state
    to up
    00:00:13: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan140, changed
    state
    to up
    00:00:13: %LINK-3-UPDOWN: Interface Vlan195, changed state to up
    00:00:13: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan141, changed
    state
    to up
    00:00:13: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan146, changed
    state
    to up
    00:00:13: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan147, changed
    state
    to up
    00:00:13: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan150, changed
    state
    to up
    00:00:13: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan151, changed
    state
    to up
    00:00:13: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan160, changed
    state
    to up
    00:00:14: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan161, changed
    state
    to up
    00:00:14: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan162, changed
    state
    to up
    00:00:14: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan170, changed
    state
    to up
    00:00:14: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan171, changed
    state
    to up
    00:00:14: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan175, changed
    state
    to up
    00:00:14: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan177, changed
    state
    to up
    00:00:14: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan180, changed
    state
    to up
    00:00:14: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan195, changed
    state
    to up
    00:08:36: %SYS-5-CONFIG_I: Configured from console by console
    00:10:33: %SYS-5-CONFIG_I: Configured from console by console
    00:13:36: %SYS-5-CONFIG_I: Configured from console by console
    00:20:26: %SYS-5-CONFIG_I: Configured from console by console
    00:21:27: %SYS-5-CONFIG_I: Configured from console by console
    00:22:15: %SYS-5-CONFIG_I: Configured from console by console
    Queued messages:Free space check for bootflash:crashinfo_19210501-153140
    failed
    (1/32768)

    *** System received a Software forced crash ***
    signal= 0x17, code= 0x24, context= 0x30dcb0c0
    PC = 0x3021e2a0, Cause = 0x2c20, Status Reg = 0x34018002

    System Bootstrap, Version 12.1(3r)E2, RELEASE SOFTWARE (fc1)
    Copyright (c) 2000 by cisco Systems, Inc.
    Cat6k-MSFC2 platform with 131072 Kbytes of main memory


    Self decompressing the image :
    #################################################
    ######################################################################## [OK]


    %SYS-6-BOOT_MESSAGES: Messages above this line are from the boot loader.
    Self decompressing the image : #######################################[OK]

    Restricted Rights Legend

    Use, duplication, or disclosure by the Government is
    subject to restrictions as set forth in subparagraph
    (c) of the Commercial Computer Software - Restricted
    Rights clause at FAR sec. 52.227-19 and subparagraph
    (c) (1) (ii) of the Rights in Technical Data and Computer
    Software clause at DFARS sec. 252.227-7013.

    cisco Systems, Inc.
    170 West Tasman Drive
    San Jose, California 95134-1706



    Cisco Internetwork Operating System Software
    IOS (tm) MSFC2 Software (C6MSFC2-IS-M), Version 12.1(2)E, EARLY DEPLOYMENT
    RELEA
    SE SOFTWARE (fc1)
    Copyright (c) 1986-2000 by cisco Systems, Inc.
    Compiled Mon 19-Jun-00 22:17 by linda
    Image text-base: 0x30008930, data-base: 0x30D14000

    cisco Cat6k-MSFC2 (R7000) processor with 114688K/16384K bytes of memory.
    Processor board ID SAD05020HPZ
    R7000 CPU at 300Mhz, Implementation 39, Rev 2.1, 256KB L2, 1024KB L3 Cache
    Last reset from power-on
    Bridging software.
    X.25 software, Version 3.0.0.
    509K bytes of non-volatile configuration memory.

    16384K bytes of Flash internal SIMM (Sector size 512K).


    Press RETURN to get started!





    ------------------------------ Özgün Mesaj -------------------------------
    Konu: Re: [cisco-ttl] Catalyst 6500 (sw-x6k-sup1a-2ge) modul
    Gönderen: "Serhat Uslay" <[email protected]>
    Tarih: 6 Temmuz 2005, Çarşamba, 3:35 am
    Alıcı: [email][email protected][/email]
    Cc: [email][email protected][/email]
    --------------------------------------------------------------------------


    Console'da "switch console" yazarak MSFC consoluna giris yapabilirsin..
    (Buradan hatanin ne oldugunu gorebilmen lazim, console ciktisini yolla
    bakayim..)






    "M.Fatih ULUÇAM" <[email protected]>
    Sent by: [email][email protected][/email]
    05/07/05 05:25 PM
    Please respond to
    [email][email protected][/email]


    To
    [email][email protected][/email]
    cc

    Subject
    Re: [cisco-ttl] Catalyst 6500 (sw-x6k-sup1a-2ge) modul






    sh version çıktısı.

    WS-C6006 Software, Version NmpSW: 5.5(1)
    Copyright (c) 1995-2000 by Cisco Systems
    NMP S/W compiled on Jun 8 2000, 21:09:45

    System Bootstrap Version: 5.3(1)

    Hardware Version: 2.0 Model: WS-C6006 Serial #: TBA04510859

    Mod Port Model Serial # Versions
    --- ---- ------------------- -----------
    --------------------------------------
    1 2 WS-X6K-SUP1A-2GE SAD05020DAT Hw : 7.0
    Fw : 5.3(1)
    Fw1: 5.4(2)
    Sw : 5.5(1)
    Sw1: 5.5(1)
    L3 Switching Engine SAD05020F26 Hw : 1.1
    3 16 WS-X6416-GBIC SAD043609TJ Hw : 1.2
    Fw : 5.4(2)
    Sw : 5.5(1)
    4 48 WS-X6348-RJ-45 SAL044111CT Hw : 1.4
    Fw : 5.4(2)
    Sw : 5.5(1)
    15 1 WS-F6K-MSFC2 SAD05020HPZ Hw : 1.1

  6. #6
    M. Fatih ULUÇAM Guest

    Standart Re: [Fwd: Re: Catalyst 6500 sh version

    Serhat bey;
    sh version çıktısı da

    sh version
    Cisco Internetwork Operating System Software
    IOS (tm) MSFC2 Software (C6MSFC2-IS-M), Version 12.1(2)E, EARLY DEPLOYMENT
    RELEASE SOFTWARE (fc1)
    Copyright (c) 1986-2000 by cisco Systems, Inc.
    Compiled Mon 19-Jun-00 22:17 by linda
    Image text-base: 0x30008930, data-base: 0x30D14000

    ROM: System Bootstrap, Version 12.1(3r)E2, RELEASE SOFTWARE (fc1)
    BOOTFLASH: MSFC2 Software (C6MSFC2-BOOT-M), Version 12.1(2)E, EARLY
    DEPLOYMENT RELEASE SOFTWARE (fc1)

    VAN_MSFC1 uptime is 25 minutes
    System returned to ROM by bus error at PC 0x30201C2C, address 0x30D54CB0
    Running default software

    cisco Cat6k-MSFC2 (R7000) processor with 114688K/16384K bytes of memory.
    Processor board ID SAD05020HPZ
    R7000 CPU at 300Mhz, Implementation 39, Rev 2.1, 256KB L2, 1024KB L3 Cache
    Last reset from power-on
    Bridging software.
    X.25 software, Version 3.0.0.
    33 Virtual Ethernet/IEEE 802.3 interface(s)
    509K bytes of non-volatile configuration memory.
    --More--
    16384K bytes of Flash internal SIMM (Sector size 512K).
    Configuration register is 0x102

    ilginiz için teşekkürler.

  7. #7
    Serhat Uslay Guest

    Standart Re: [Fwd: Re: Catalyst 6500 (sw-x6k-sup1a-2ge) modul]

    1) Bu problem eger bir config change yada yeni bir kart/HW kullanimindan
    sonra basladi ise, sistemi eski sekline dondur..
    2) Queued messages:Free space check for
    bootflash:crashinfo_19210501-153140[color=blue]
    > failed
    > (1/32768) Bootflash'daki crashinfo yu TFTP server' na kopyala ve
    [/color]
    crashinfo'yu silerek bootflash'da yer ac (yeni crash icin)

    3) Eger 1'in cevabi olumsuz ise IOS i upgrade et. Version 12.1(2)E eski
    bir IOS. Ben 12.1(19)E1 uzun sureden beri sorunsuz kullaniyorum..

    4) Eger IOS upgrade'ine ragmen sorun devam ediyorsa CISCO TAC 'a basvur ve
    crashinfo'yu yolla.

    (CatOS de cok eski, bunu da Sw : 6.4(13) a degistir..)


    Serhat

+ Konuyu Cevapla

Bu Konuyu Paylaşın !

Bu Konuyu Paylaşın !

Yetkileriniz

  • Konu Acma Yetkiniz Yok
  • Cevap Yazma Yetkiniz Yok
  • Eklenti Yükleme Yetkiniz Yok
  • Mesajınızı Değiştirme Yetkiniz Yok