F/R switching configurasyonun gerektigini dusunmuyorum.

DTE/DCE cablo kullanip DCE tarafta clock rate belirlenmesi yeterli olacaktir

DCE router
Interface S0
Ip address x.x.x.x x.x.x.x
Encapsulation hdlc
Clock rate 1920000

DTE router
Interface S0
Ip address x.x.x.x x.x.x.x
Encapsulation hdlc


Hangisinin DCE oldugunun is sh controller s0 komutunun ciktisinda gorulevilir]

tayfun


-----Original Message-----
From: [email][email protected][/email] [mailto:[email protected]] On Behalf Of Hilmiye Balcik
Sent: Thursday, 16 June 2005 23:33
To: [email][email protected][/email]
Subject: RE: [cisco-ttl] 2 router serial interface'den baðlama

Evet, baglayabilirsiniz. Bunun için F/R switching yapmaniz gerekir. Ayrica DTE-DCE kablo kullanmaniz gerekecek. Bunun için, normal bir F/R konfig. yapin, sadece DCE kablonun bagli oldugu router uzerinde digerinden farkli birkac komut kullanmaniz gerekecek. İlgili konfigler ektedir.



Kolay Gelsin,

Hilmiye





-----Original Message-----

From: [email][email protected][/email] [mailto:[email protected]] On Behalf Of Bilal Tas

Sent: Thursday, June 16, 2005 2:12 PM

To: [email][email protected][/email]

Subject: [cisco-ttl] 2 router serial interface'den baðlama





Merhaba

2 adet router'ý lokalde serial interface'den modem olmadan baðlayýp çalýþtýrabilirmiyiz.

Bununla ilgili örnek var mý elinizde.





---------------------------------

Discover Yahoo!

Have fun online with music videos, cool games, IM & more. Check it out!



[Non-text portions of this message have been removed]







--

Cisco Teknik Tartisma Listesi (Cisco-ttl)



Bu listede onerilen degisikliklerin uygulanmasindaki tum sorumluluk

kullaniciya aittir. Liste yoneticileri, oneride bulunan liste uyeleri ya da

bu uyelerin calistigi kuruluslar herhangi bir sekilde sorumlu tutulamazlar.

Yahoo! Groups Links














----------

test1#sh run

Building configuration...



Current configuration:

!

version 12.0

service timestamps debug uptime

service timestamps log uptime

no service password-encryption

!

hostname test1

!

!

!

!

!

!

ip subnet-zero

!

frame-relay switching

!

!

process-max-time 200

!

interface Ethernet0

no ip address

no ip directed-broadcast

shutdown

!

interface Serial1

no ip address

no ip directed-broadcast

encapsulation frame-relay

clockrate 128000

cdp enable

frame-relay lmi-type ansi

frame-relay intf-type dce

!

interface Serial1.1 point-to-point

ip address x.x.x.x

no ip directed-broadcast

frame-relay interface-dlci 16

!

ip classless

no ip http server

!

!

line con 0

transport input none

line vty 0 4

login

!

end



test1#sh int s0

Serial0 is up, line protocol is up

Hardware is QUICC Serial

MTU 1500 bytes, BW 1544 Kbit, DLY 20000 usec,

reliability 255/255, txload 1/255, rxload 1/255

Encapsulation FRAME-RELAY IETF, loopback not set

Keepalive set (10 sec)

LMI enq sent 13, LMI stat recvd 0, LMI upd recvd 0

LMI enq recvd 55, LMI stat sent 55, LMI upd sent 0, DCE LMI up

LMI DLCI 0 LMI type is ANSI Annex D frame relay DCE

Broadcast queue 0/64, broadcasts sent/dropped 23/0, interface broadcasts 3

Last input 00:00:00, output 00:00:00, output hang never

Last clearing of "show interface" counters 00:14:06

Input queue: 0/75/0 (size/max/drops); Total output drops: 0

Queueing strategy: weighted fair

Output queue: 0/1000/64/0 (size/max total/threshold/drops)

Conversations 0/2/256 (active/max active/max total)

Reserved Conversations 0/0 (allocated/max allocated)

5 minute input rate 0 bits/sec, 0 packets/sec

5 minute output rate 0 bits/sec, 0 packets/sec

4470 packets input, 459397 bytes, 0 no buffer

Received 0 broadcasts, 0 runts, 0 giants, 0 throttles

0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort

4516 packets output, 461634 bytes, 0 underruns

0 output errors, 0 collisions, 8 interface resets

0 output buffer failures, 0 output buffers swapped out

14 carrier transitions

DCD=up DSR=up DTR=up RTS=up CTS=up



test1#sh frame pvc



PVC Statistics for interface Serial0 (Frame Relay DCE)



Active Inactive Deleted Static

Local 1 0 0 0

Switched 0 0 0 0

Unused 0 0 0 0



DLCI = 100, DLCI USAGE = LOCAL, PVC STATUS = ACTIVE, INTERFACE = Serial0.1



input pkts 4415 output pkts 4463 in bytes 458627

out bytes 462566 dropped pkts 0 in FECN pkts 0

in BECN pkts 0 out FECN pkts 0 out BECN pkts 0

in DE pkts 0 out DE pkts 0

out bcast pkts 23 out bcast bytes 7424

pvc create time 00:14:12, last time pvc status changed 00:09:06

test1#ping 192.168.1.1



Type escape sequence to abort.

Sending 5, 100-byte ICMP Echos to 192.168.1.1, timeout is 2 seconds:

!!!!!

Success rate is 100 percent (5/5), round-trip min/avg/max = 64/75/80 ms

test1#
----------

test2#sh int s0

Serial0 is up, line protocol is up

Hardware is QUICC Serial

MTU 1500 bytes, BW 1544 Kbit, DLY 20000 usec, rely 255/255, load 1/255

Encapsulation FRAME-RELAY IETF, loopback not set, keepalive set (10 sec)

LMI enq sent 54, LMI stat recvd 32, LMI upd recvd 0, DTE LMI up

LMI enq recvd 0, LMI stat sent 0, LMI upd sent 0

LMI DLCI 0 LMI type is ANSI Annex D frame relay DTE

Broadcast queue 0/64, broadcasts sent/dropped 10/0, interface broadcasts 2

Last input 00:00:00, output 00:00:00, output hang never

Last clearing of "show interface" counters never

Queueing strategy: fifo

Output queue 0/40, 0 drops; input queue 0/75, 0 drops

5 minute input rate 1000 bits/sec, 4 packets/sec

5 minute output rate 1000 bits/sec, 3 packets/sec

4408 packets input, 454826 bytes, 0 no buffer

Received 0 broadcasts, 0 runts, 0 giants, 0 throttles

0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort

4417 packets output, 455369 bytes, 0 underruns

0 output errors, 0 collisions, 10 interface resets

0 output buffer failures, 0 output buffers swapped out

21 carrier transitions

DCD=up DSR=up DTR=up RTS=up CTS=up



test2# sh frame pvc



PVC Statistics for interface Serial0 (Frame Relay DTE)



DLCI = 100, DLCI USAGE = LOCAL, PVC STATUS = ACTIVE, INTERFACE = Serial0.1



input pkts 4398 output pkts 4383 in bytes 455326

out bytes 456627 dropped pkts 0 in FECN pkts 0

in BECN pkts 0 out FECN pkts 0 out BECN pkts 0

in DE pkts 0 out DE pkts 0

out bcast pkts 10 out bcast bytes 3488

pvc create time 00:10:39, last time pvc status changed 00:05:17

test2#sh run

Building configuration...



Current configuration:

!

version 12.0

service timestamps debug uptime

service timestamps log uptime

no service password-encryption

!

hostname test2

!

!

ip subnet-zero

!

!

!

interface Ethernet0

no ip address

no ip directed-broadcast

shutdown

!

interface Serial0

no ip address

no ip directed-broadcast

encapsulation frame-relay IETF

logging event subif-link-status

logging event dlci-status-change

no fair-queue

frame-relay lmi-type ansi

!

interface Serial0.1 point-to-point

ip address x.x.x.x

no ip directed-broadcast

frame-relay interface-dlci 16

!

ip classless

!

!

line con 0

transport input none

line vty 0 4

login

!