Csco 1310g Password Recovery

[YAVUZ TEMIZKAN]

1410 olmasın?
1310g diye bir model duymadım.

[url]http://www.cisco.com/en/US/products/hw/wireless/ps430/products_password_recovery09186a00800949d0.shtml#ca_1410_ser[/url]


-----Original Message-----
From: Ali KAPTAN [mailto:[email protected]]
Sent: 14 Aralık 2004 Salı 15:56
To: [email][email protected][/email]
Subject: [cisco-ttl] cisco 1310g password'ü recovery etmenin yönteminibilen varsa acil mail atabilirmi??????






[Non-text portions of this message have been removed]



Bu listenin Cisco Systems ile herhangi bir baglantisi bulunmamaktadir.

Listeden cikmak için [email][email protected][/email] adresine bir e-posta gönderebilirsiniz.



Yahoo! Groups Sponsor
ADVERTISEMENT
click here <http://us.ard.yahoo.com/SIG=129uvesgf/M=295196.4901138.6071305.3001176/D=groups/S=1705004726:HM/EXP=1103118973/A=2128215/R=0/SIG=10se96mf6/*http://companion.yahoo.com>
<http://us.adserver.yahoo.com/l?M=295196.4901138.6071305.3001176/D=groups/S=:HM/A=2128215/rand=943883524>


________________________________

Yahoo! Groups Links


* To visit your group on the web, go to:
[url]http://groups.yahoo.com/group/cisco-ttl/[/url]

* To unsubscribe from this group, send an email to:
[email][email protected][/email] <mailto:[email protected]?subject=Unsubscribe>

* Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service <http://docs.yahoo.com/info/terms/> .




[Non-text portions of this message have been removed]



------------------------ Yahoo! Groups Sponsor --------------------~-->
$4.98 domain names from Yahoo!. Register anything.
[url]http://us.click.yahoo.com/Q7_YsB/neXJAA/yQLSAA/26EolB/TM[/url]
--------------------------------------------------------------------~->

Bu listenin Cisco Systems ile herhangi bir baglantisi bulunmamaktadir.

Listeden cikmak için [email][email protected][/email] adresine bir e-posta gönderebilirsiniz.
Yahoo! Groups Links

<*> To visit your group on the web, go to:
[url]http://groups.yahoo.com/group/cisco-ttl/[/url]

<*> To unsubscribe from this group, send an email to:
[email][email protected][/email]

<*> Your use of Yahoo! Groups is subject to:
[url]http://docs.yahoo.com/info/terms/[/url]

[Ali KAPTAN]

Corrupt IOS Configuration or Lost Password Procedure
This section describes the procedure for resetting the access point/bridge
to its default settings in the unlikely event that the operating system is
corrupt or if you have misplaced the configuration login and password.
Because the access point/bridge does not have a mode switch, you must use
the console port to perform this operation. Follow these steps to reset the
unit to its default settings:


----------------------------------------------------------------------------
----

Step 1 Open the CLI using a Telnet session or a connection to the access
point/bridge's console port.

Step 2 Reboot the access point/bridge by removing power and reapplying
power.

Step 3 Let the access point/bridge boot until the command prompt appears and
the access point/bridge begins to inflate the image. When you see these
lines on the CLI, press Esc:



----------------------------------------------------------------------------
----

Note Depending on the terminal emulation software you are using, you may
have to press Esc twice to access the boot loader.


----------------------------------------------------------------------------
----


Loading
"flash:/c1310-k9kw-7mx.v122_15_ja.200040314-k9w7-mx.v122_15_ja.20040314"

....#########################################################################
####

############################################################################
#######

############################################################################
########


Messages similar to those below appear:

Error loading
"flash:/c1310-k9kw-7mx.v122_15_ja.200040314-k9w7-mx.v122_15_ja.20040314"


Interrupt within 5 seconds to abort boot process.

Boot process terminated.


The system is unable to boot automatically. The BOOT environment variable
needs to be set
to a bootable image.


C1310 Boot Loader (C1310-BOOT-M), Version 12.2
[BLD-v122_15-ja_throttle.20040314 100]


bridge:


Step 4 At the prompt, enter the following command to show a directory of the
flash file system similar to the directory shown below:

bridge: dir flash:

Directory of flash:/


2 -rwx 0 <date> env_vars

5 drwx 384 <date>
C1310-k9w7-mx.v133_15_JA.20040314

3 -rwx 1128 <date> config.txt

4 -rwx 5 <date>
private-config


3693568 bytes available (4047872 bytes used)


bridge:


Step 5 Delete or rename the files config.txt and env_vars and reboot the
bridge. Don't forget the / character before the filenames:

bridge: delete flash:config.txt

Are you sure you want to delete flash:/config.txt (y/n)?y

File "flash:/config.txt" deleted


bridge: delete flash:/env_vars

Are you sure you want to delete "flash:/env_vars" (y/n)?y

File "flash:/env_vars" deleted


bridge: boot



----------------------------------------------------------------------------
----

Note The access point/bridge is configured with factory default values,
including the IP address (set to receive an IP address using DHCP) and the
default case-sensitive user name and password (Cisco).


----------------------------------------------------------------------------
----


Step 6 When IOS software is loaded and you chose to rename the env_vars and
config.txt files, you can use the del privileged EXEC command to delete them
from Flash.

bridge# del flash:env_varsold

Delete filename [env_varsold]

Delete flash:env_varsold [confirm]

br#


bridge# del flash:config.old

Delete filename [config.old]

Delete flash:config.old [confirm]

bridge#


-----Original Message-----
From: YAVUZ TEMIZKAN [mailto:[email protected]]
Sent: Tuesday, December 14, 2004 4:08 PM
To: [email][email protected][/email]
Subject: RE: [cisco-ttl] cisco 1310g password'ü recovery etmenin yöntemini
bilen varsa acil mail atabilirmi??????


1410 olmasın?
1310g diye bir model duymadım.

[url]http://www.cisco.com/en/US/products/hw/wireless/ps430/products_password_reco[/url]
very09186a00800949d0.shtml#ca_1410_ser


-----Original Message-----
From: Ali KAPTAN [mailto:[email protected]]
Sent: 14 Aralık 2004 Salı 15:56
To: [email][email protected][/email]
Subject: [cisco-ttl] cisco 1310g password'ü recovery etmenin
yöntemini bilen varsa acil mail atabilirmi??????






[Non-text portions of this message have been removed]



Bu listenin Cisco Systems ile herhangi bir baglantisi
bulunmamaktadir.

Listeden cikmak için [email][email protected][/email] adresine
bir e-posta gönderebilirsiniz.



Yahoo! Groups Sponsor
ADVERTISEMENT
click here
<[url]http://us.ard.yahoo.com/SIG=129uvesgf/M=295196.4901138.6071305.3001176/D=gr[/url]
oups/S=1705004726:HM/EXP=1103118973/A=2128215/R=0/SIG=10se96mf6/*[url]http://comp[/url]
anion.yahoo.com>

<[url]http://us.adserver.yahoo.com/l?M=295196.4901138.6071305.3001176/D=groups/S=[/url]
:HM/A=2128215/rand=943883524>


________________________________

Yahoo! Groups Links


* To visit your group on the web, go to:
[url]http://groups.yahoo.com/group/cisco-ttl/[/url]

* To unsubscribe from this group, send an email to:
[email][email protected][/email]
<mailto:[email protected]?subject=Unsubscribe>

* Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service <http://docs.yahoo.com/info/terms/> .




[Non-text portions of this message have been removed]




Bu listenin Cisco Systems ile herhangi bir baglantisi bulunmamaktadir.

Listeden cikmak için [email][email protected][/email] adresine bir
e-posta gönderebilirsiniz.
Yahoo! Groups Links











------------------------ Yahoo! Groups Sponsor --------------------~-->
$4.98 domain names from Yahoo!. Register anything.
[url]http://us.click.yahoo.com/Q7_YsB/neXJAA/yQLSAA/26EolB/TM[/url]
--------------------------------------------------------------------~->

Bu listenin Cisco Systems ile herhangi bir baglantisi bulunmamaktadir.

Listeden cikmak için [email][email protected][/email] adresine bir e-posta gönderebilirsiniz.
Yahoo! Groups Links

<*> To visit your group on the web, go to:
[url]http://groups.yahoo.com/group/cisco-ttl/[/url]

<*> To unsubscribe from this group, send an email to:
[email][email protected][/email]

<*> Your use of Yahoo! Groups is subject to:
[url]http://docs.yahoo.com/info/terms/[/url]