traffik sorunu
CLI Guru - Cisco Eğitim ve Danışmanlık Merkezi |

+ Konuyu Cevapla
Toplam 4 sonuçtan 1 ile 4 arasındakiler gösteriliyor.
traffik sorunu

bir seri interface uzerinde bandwithi dolduracak kadar traffic var. uzerindeki musteriler traffic cekmiyorken nasıl oluyorda full trafic cekiyor anlayamadim. aslinda ustunde ospf ve bgp calisiyor ama o kadar traffic olusturmasi

  1. #1
    Deniz Pecel Guest

    Standart traffik sorunu


    bir seri interface uzerinde bandwithi dolduracak kadar
    traffic var. uzerindeki musteriler traffic cekmiyorken
    nasıl oluyorda full trafic cekiyor anlayamadim.
    aslinda ustunde ospf ve bgp calisiyor ama o kadar
    traffic olusturmasi mumkun mu? ospf ve bgpinin
    yarattigi trafigi gormenin bir yolu varmi? router
    as5300 ustunde dedigim gibi ospf, bgp, mpls calisiyor
    3 tane musteri var. o kadar. dial-up modemleri pek
    kullanilmiyor , iosuda 12.3(10).

    iyi calismalar..



    __________________________________
    Do you Yahoo!?
    Yahoo! Mail - 250MB free storage. Do more. Manage less.
    [url]http://info.mail.yahoo.com/mail_250[/url]


    ------------------------ Yahoo! Groups Sponsor --------------------~-->
    Make a clean sweep of pop-up ads. Yahoo! Companion Toolbar.
    Now with Pop-Up Blocker. Get it for free!
    [url]http://us.click.yahoo.com/L5YrjA/eSIIAA/yQLSAA/26EolB/TM[/url]
    --------------------------------------------------------------------~->

    Bu listenin Cisco Systems ile herhangi bir baglantisi bulunmamaktadir.

    Listeden cikmak için [email][email protected][/email] adresine bir e-posta gönderebilirsiniz.
    Yahoo! Groups Links

    <*> To visit your group on the web, go to:
    [url]http://groups.yahoo.com/group/cisco-ttl/[/url]

    <*> To unsubscribe from this group, send an email to:
    [email][email protected][/email]

    <*> Your use of Yahoo! Groups is subject to:
    [url]http://docs.yahoo.com/info/terms/[/url]






  2. #2
    Ilker Temir Guest

    Standart Re: traffik sorunu


    Arkadaslar,

    Lutfen bu listede soru sorarken daha verilere dayali olarak soralim. Bu
    tur tanimlamalar ile teknik duzeyde yardim alinmasi mumkun gorunmuyor.

    Eger gercekten yardim istiyorsaniz daha somut veriler sunmalisiniz. En
    azindan hattin dolu oldugunu gosterecek ve diger interfaceler ile
    karsilastirmayi saglayacak bir kac cikti. Bu soruya ek olarak hic
    olmazsa bir "show interface" ciktisini gormeyi beklerdim.

    Bir ust duzey seviye arastirma, routerda netflow'u enable edip gecen
    trafige bir goz atmayi gerektirir. Bu ciktilari listeye gonderip yardim
    istemek tamam ama bunlar yapilmadan bu sorunun kimseye faydasi olmuyor.

    Ilker

    Deniz Pecel wrote:[color=blue]
    > bir seri interface uzerinde bandwithi dolduracak kadar
    > traffic var. uzerindeki musteriler traffic cekmiyorken
    > nasıl oluyorda full trafic cekiyor anlayamadim.
    > aslinda ustunde ospf ve bgp calisiyor ama o kadar
    > traffic olusturmasi mumkun mu? ospf ve bgpinin
    > yarattigi trafigi gormenin bir yolu varmi? router
    > as5300 ustunde dedigim gibi ospf, bgp, mpls calisiyor
    > 3 tane musteri var. o kadar. dial-up modemleri pek
    > kullanilmiyor , iosuda 12.3(10).
    >
    > iyi calismalar..
    >
    >
    >
    > __________________________________
    > Do you Yahoo!?
    > Yahoo! Mail - 250MB free storage. Do more. Manage less.
    > [url]http://info.mail.yahoo.com/mail_250[/url]
    >
    >
    >
    > Bu listenin Cisco Systems ile herhangi bir baglantisi bulunmamaktadir.
    >
    > Listeden cikmak için [email][email protected][/email] adresine bir e-posta gönderebilirsiniz.
    > Yahoo! Groups Links
    >
    >
    >
    >
    >
    >[/color]


    ------------------------ Yahoo! Groups Sponsor --------------------~-->
    $4.98 domain names from Yahoo!. Register anything.
    [url]http://us.click.yahoo.com/Q7_YsB/neXJAA/yQLSAA/26EolB/TM[/url]
    --------------------------------------------------------------------~->

    Bu listenin Cisco Systems ile herhangi bir baglantisi bulunmamaktadir.

    Listeden cikmak için [email][email protected][/email] adresine bir e-posta gönderebilirsiniz.
    Yahoo! Groups Links

    <*> To visit your group on the web, go to:
    [url]http://groups.yahoo.com/group/cisco-ttl/[/url]

    <*> To unsubscribe from this group, send an email to:
    [email][email protected][/email]

    <*> Your use of Yahoo! Groups is subject to:
    [url]http://docs.yahoo.com/info/terms/[/url]






  3. #3
    Deniz Pecel Guest

    Standart Re: traffik sorunu


    Merhaba

    istediginiz bilgiler burada duzgun
    goruntulenemediginden txt olarak attachment edip
    gonderiyorum.

    ilker bey olaya bu acidan bakamadigim icin uzgun
    oldugumu belirtmek isterim. ben sadece basit bir sorun
    olabilecegini dusundugum icin ayrintilara girmemistim.

    iyi calismalar.


    --- Ilker Temir <[email protected]> wrote:
    [color=blue]
    > Arkadaslar,
    >
    > Lutfen bu listede soru sorarken daha verilere dayali
    > olarak soralim. Bu
    > tur tanimlamalar ile teknik duzeyde yardim alinmasi
    > mumkun gorunmuyor.
    >
    > Eger gercekten yardim istiyorsaniz daha somut
    > veriler sunmalisiniz. En
    > azindan hattin dolu oldugunu gosterecek ve diger
    > interfaceler ile
    > karsilastirmayi saglayacak bir kac cikti. Bu soruya
    > ek olarak hic
    > olmazsa bir "show interface" ciktisini gormeyi
    > beklerdim.
    >
    > Bir ust duzey seviye arastirma, routerda netflow'u
    > enable edip gecen
    > trafige bir goz atmayi gerektirir. Bu ciktilari
    > listeye gonderip yardim
    > istemek tamam ama bunlar yapilmadan bu sorunun
    > kimseye faydasi olmuyor.
    >
    > Ilker
    >
    > Deniz Pecel wrote:[color=green]
    > > bir seri interface uzerinde bandwithi dolduracak[/color]
    > kadar[color=green]
    > > traffic var. uzerindeki musteriler traffic[/color]
    > cekmiyorken[color=green]
    > > nasıl oluyorda full trafic cekiyor anlayamadim.
    > > aslinda ustunde ospf ve bgp calisiyor ama o kadar
    > > traffic olusturmasi mumkun mu? ospf ve bgpinin
    > > yarattigi trafigi gormenin bir yolu varmi? router
    > > as5300 ustunde dedigim gibi ospf, bgp, mpls[/color]
    > calisiyor[color=green]
    > > 3 tane musteri var. o kadar. dial-up modemleri pek
    > > kullanilmiyor , iosuda 12.3(10).
    > >
    > > iyi calismalar..
    > >
    > >
    > >
    > > __________________________________
    > > Do you Yahoo!?
    > > Yahoo! Mail - 250MB free storage. Do more. Manage[/color]
    > less. [color=green]
    > > [url]http://info.mail.yahoo.com/mail_250[/url]
    > >
    > >
    > >
    > > Bu listenin Cisco Systems ile herhangi bir[/color]
    > baglantisi bulunmamaktadir. [color=green]
    > >
    > > Listeden cikmak için[/color]
    > [email][email protected][/email] adresine bir
    > e-posta gönderebilirsiniz. [color=green]
    > > Yahoo! Groups Links
    > >
    > >
    > >
    > >
    > >
    > > [/color]
    > [/color]




    __________________________________
    Do you Yahoo!?
    Meet the all-new My Yahoo! - Try it today!
    [url]http://my.yahoo.com[/url]


    ----------

    ip cache flow-----------------------------------------------------------------

    IP packet size distribution (1102 total packets):
    1-32 64 96 128 160 192 224 256 288 320 352 384 416 448 480
    .000 .875 .093 .017 .009 .001 .001 .000 .000 .000 .000 .000 .000 .000 .000

    512 544 576 1024 1536 2048 2560 3072 3584 4096 4608
    .000 .000 .000 .000 .000 .000 .000 .000 .000 .000 .000

    IP Flow Switching Cache, 278544 bytes
    4 active, 4092 inactive, 70 added
    1631 ager polls, 0 flow alloc failures
    Active flows timeout in 30 minutes
    Inactive flows timeout in 15 seconds
    IP Sub Flow Cache, 17032 bytes
    0 active, 1024 inactive, 0 added, 0 added to flow
    0 alloc failures, 0 force free
    1 chunk, 1 chunk added
    last clearing of statistics never
    Protocol Total Flows Packets Bytes Packets Active(Sec) Idle(Sec)
    -------- Flows /Sec /Flow /Pkt /Sec /Flow /Flow
    TCP-Telnet 4 0.0 185 40 0.0 77.4 15.2
    TCP-BGP 13 0.0 2 76 0.0 7.1 15.4
    TCP-other 28 0.0 8 52 0.0 11.3 7.4
    UDP-other 7 0.0 1 123 0.0 0.0 15.3
    ICMP 14 0.0 5 84 0.0 4.0 15.4
    Total: 66 0.0 16 47 0.1 11.7 12.0

    SrcIf SrcIPaddress DstIf DstIPaddress Pr SrcP DstP Pkts
    Se4:0.1 x Local x 06 34FC 02C7 6
    Se4:0.1 x Local x 06 806E 0017 3
    Se4:0.1 x Local x 01 0000 0800 5
    Se4:0.1 x Local x 06 00B3 2AF8 3


    sh ver----------------------------------------------------------

    Cisco Internetwork Operating System Software
    IOS (tm) 5300 Software (C5300-J-M), Version 12.3(10), RELEASE SOFTWARE (fc3)
    Copyright (c) 1986-2004 by cisco Systems, Inc.
    Compiled Tue 17-Aug-04 00:54 by kellythw
    Image text-base: 0x60008AEC, data-base: 0x6110E000

    ROM: System Bootstrap, Version 12.0(2)XD1, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)
    BOOTLDR: 5300 Software (C5300-BOOT-M), Version 12.0(4)T1, RELEASE SOFTWARE(fc1)

    xxxxx uptime is 2 hours, 44 minutes
    System returned to ROM by reload at 00:08:09 UTC Fri Sep 29 2000
    System image file is "flash:c5300-j-mz.123-10.bin"

    cisco AS5300 (R4K) processor (revision A.32) with 65536K/16384K bytes of memory.
    Processor board ID 20637297
    R4700 CPU at 150MHz, Implementation 33, Rev 1.0, 512KB L2 Cache
    Channelized E1, Version 1.0.
    Bridging software.
    X.25 software, Version 3.0.0.
    SuperLAT software (copyright 1990 by Meridian Technology Corp).
    TN3270 Emulation software.
    Primary Rate ISDN software, Version 1.1.
    Backplane revision 2
    Manufacture Cookie Info:
    EEPROM Type 0x0001, EEPROM Version 0x01, Board ID 0x30,
    Board Hardware Version 3.1, Item Number 800-2544-03,
    Board Revision D0, Serial Number 20637297,
    PLD/ISP Version 0.0, Manufacture Date 7-Jun-2000.
    1 Ethernet/IEEE 802.3 interface(s)
    1 FastEthernet/IEEE 802.3 interface(s)
    39 Serial network interface(s)
    240 terminal line(s)
    8 Channelized E1/PRI port(s)
    128K bytes of non-volatile configuration memory.
    16384K bytes of processor board System flash (Read/Write)
    8192K bytes of processor board Boot flash (Read/Write)

    Configuration register is 0x2102

    interfaceler---------------------------------------------------------------------

    Serial4:0 is up, line protocol is up
    Hardware is DSX1
    Description: ANA HAT
    MTU 1500 bytes, BW 256 Kbit, DLY 20000 usec,
    reliability 255/255, txload 181/255, rxload 237/255
    Encapsulation FRAME-RELAY, loopback not set
    Keepalive set (10 sec)
    LMI enq sent 0, LMI stat recvd 0, LMI upd recvd 0
    LMI enq recvd 959, LMI stat sent 959, LMI upd sent 0, DCE LMI up
    LMI DLCI 1023 LMI type is CISCO frame relay DCE
    FR SVC disabled, LAPF state down
    Broadcast queue 0/64, broadcasts sent/dropped 9431/0, interface broadcasts 9431
    Last input 00:00:00, output never, output hang never
    Last clearing of "show interface" counters 02:39:54
    Input queue: 38/75/0/0 (size/max/drops/flushes); Total output drops: 108
    Queueing strategy: weighted fair
    Output queue: 0/1000/64/108 (size/max total/threshold/drops)
    Conversations 0/22/256 (active/max active/max total)
    Reserved Conversations 0/0 (allocated/max allocated)
    Available Bandwidth 192 kilobits/sec
    30 second input rate 238000 bits/sec, 182 packets/sec
    30 second output rate 182000 bits/sec, 121 packets/sec
    1774304 packets input, 259725572 bytes, 0 no buffer
    Received 0 broadcasts, 0 runts, 0 giants, 0 throttles
    0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
    1450810 packets output, 221527894 bytes, 0 underruns
    0 output errors, 0 collisions, 0 interface resets
    0 output buffer failures, 0 output buffers swapped out
    1 carrier transitions
    Timeslot(s) Used:1-4, Transmitter delay is 0 flags

    Serial4:0.1 is up, line protocol is up
    Hardware is DSX1
    Internet address is xxx.xxx.xxx.xxx/x
    MTU 1500 bytes, BW 256 Kbit, DLY 20000 usec,
    reliability 255/255, txload 160/255, rxload 239/255
    Encapsulation FRAME-RELAY
    Last clearing of "show interface" counters never


    Hardware is DSX1
    Description: MUSTERI1
    MTU 1500 bytes, BW 64 Kbit, DLY 20000 usec,
    reliability 255/255, txload 195/255, rxload 1/255
    Encapsulation FRAME-RELAY, loopback not set
    Keepalive set (10 sec)
    LMI enq sent 0, LMI stat recvd 0, LMI upd recvd 0
    LMI enq recvd 945, LMI stat sent 945, LMI upd sent 0, DCE LMI up
    LMI DLCI 0 LMI type is ANSI Annex D frame relay DCE
    FR SVC disabled, LAPF state down
    Broadcast queue 0/64, broadcasts sent/dropped 0/0, interface broadcasts 0
    Last input 00:00:05, output never, output hang never
    Last clearing of "show interface" counters 02:40:22
    Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 2209
    Queueing strategy: weighted fair
    Output queue: 10/1000/64/2209 (size/max total/threshold/drops)
    Conversations 1/2/256 (active/max active/max total)
    Reserved Conversations 0/0 (allocated/max allocated)
    Available Bandwidth 48 kilobits/sec
    30 second input rate 0 bits/sec, 4 packets/sec
    30 second output rate 49000 bits/sec, 72 packets/sec
    71117 packets input, 4273513 bytes, 0 no buffer
    Received 0 broadcasts, 0 runts, 0 giants, 0 throttles
    150 input errors, 9 CRC, 0 frame, 0 overrun, 0 ignored, 81 abort
    351580 packets output, 28946718 bytes, 0 underruns
    0 output errors, 0 collisions, 0 interface resets
    0 output buffer failures, 0 output buffers swapped out
    1 carrier transitions
    Timeslot(s) Used:9, Transmitter delay is 0 flags


    Serial4:2 is up, line protocol is up
    Hardware is DSX1
    Description: MUSTERI2
    MTU 1500 bytes, BW 128 Kbit, DLY 20000 usec,
    reliability 255/255, txload 1/255, rxload 1/255
    Encapsulation FRAME-RELAY, loopback not set
    Keepalive set (10 sec)
    LMI enq sent 0, LMI stat recvd 0, LMI upd recvd 0
    LMI enq recvd 963, LMI stat sent 963, LMI upd sent 0, DCE LMI up
    LMI DLCI 0 LMI type is ANSI Annex D frame relay DCE
    FR SVC disabled, LAPF state down
    Broadcast queue 0/64, broadcasts sent/dropped 0/0, interface broadcasts 0
    Last input 00:00:01, output never, output hang never
    Last clearing of "show interface" counters 02:40:57
    Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0
    Queueing strategy: weighted fair
    Output queue: 0/1000/64/0 (size/max total/threshold/drops)
    Conversations 0/1/256 (active/max active/max total)
    Reserved Conversations 0/0 (allocated/max allocated)
    Available Bandwidth 96 kilobits/sec
    30 second input rate 0 bits/sec, 0 packets/sec
    30 second output rate 0 bits/sec, 0 packets/sec
    8060 packets input, 1029676 bytes, 0 no buffer
    Received 0 broadcasts, 0 runts, 0 giants, 0 throttles
    1 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 1 abort
    1795 packets output, 131934 bytes, 0 underruns
    0 output errors, 0 collisions, 0 interface resets
    0 output buffer failures, 0 output buffers swapped out
    1 carrier transitions
    Timeslot(s) Used:5-6, Transmitter delay is 0 flags




    Serial4:3 is up, line protocol is up
    Hardware is DSX1
    Description: MUSTERI3
    Internet address is 1xx.xxx.xxx.xxx/x
    MTU 1500 bytes, BW 64 Kbit, DLY 20000 usec,
    reliability 255/255, txload 1/255, rxload 1/255
    Encapsulation PPP, LCP Open
    Open: IPCP, loopback not set
    Keepalive set (10 sec)
    Last input 00:01:03, output never, output hang never
    Last clearing of "show interface" counters 02:41:23
    Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0
    Queueing strategy: weighted fair
    Output queue: 0/1000/64/0 (size/max total/threshold/drops)
    Conversations 0/3/256 (active/max active/max total)
    Reserved Conversations 0/0 (allocated/max allocated)
    Available Bandwidth 48 kilobits/sec
    30 second input rate 0 bits/sec, 0 packets/sec
    30 second output rate 0 bits/sec, 0 packets/sec
    8870 packets input, 1236388 bytes, 0 no buffer
    Received 0 broadcasts, 0 runts, 0 giants, 0 throttles
    0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
    7331 packets output, 1013475 bytes, 0 underruns
    0 output errors, 0 collisions, 0 interface resets
    0 output buffer failures, 0 output buffers swapped out
    1 carrier transitions
    Timeslot(s) Used:7, Transmitter delay is 0 flags

    [Non-text portions of this message have been removed]



    ------------------------ Yahoo! Groups Sponsor --------------------~-->
    Make a clean sweep of pop-up ads. Yahoo! Companion Toolbar.
    Now with Pop-Up Blocker. Get it for free!
    [url]http://us.click.yahoo.com/L5YrjA/eSIIAA/yQLSAA/26EolB/TM[/url]
    --------------------------------------------------------------------~->

    Bu listenin Cisco Systems ile herhangi bir baglantisi bulunmamaktadir.

    Listeden cikmak için [email][email protected][/email] adresine bir e-posta gönderebilirsiniz.
    Yahoo! Groups Links

    <*> To visit your group on the web, go to:
    [url]http://groups.yahoo.com/group/cisco-ttl/[/url]

    <*> To unsubscribe from this group, send an email to:
    [email][email protected][/email]

    <*> Your use of Yahoo! Groups is subject to:
    [url]http://docs.yahoo.com/info/terms/[/url]






  4. #4
    Serhat Uslay Guest

    Standart Re: traffik sorunu



    Ilker,
    Guzel acikladin, birde bir soru soruldugu zaman bazi arkadaslar eger o
    konuda gercekten tecrube sahibi degilller ise konusmasinlar.
    Serhat


    Please respond to [email][email protected][/email]

    To: [email][email protected][/email]
    cc:
    Subject: Re: [cisco-ttl] traffik sorunu



    Arkadaslar,

    Lutfen bu listede soru sorarken daha verilere dayali olarak soralim. Bu
    tur tanimlamalar ile teknik duzeyde yardim alinmasi mumkun gorunmuyor.

    Eger gercekten yardim istiyorsaniz daha somut veriler sunmalisiniz. En
    azindan hattin dolu oldugunu gosterecek ve diger interfaceler ile
    karsilastirmayi saglayacak bir kac cikti. Bu soruya ek olarak hic
    olmazsa bir "show interface" ciktisini gormeyi beklerdim.

    Bir ust duzey seviye arastirma, routerda netflow'u enable edip gecen
    trafige bir goz atmayi gerektirir. Bu ciktilari listeye gonderip yardim
    istemek tamam ama bunlar yapilmadan bu sorunun kimseye faydasi olmuyor.

    Ilker

    Deniz Pecel wrote:[color=blue]
    > bir seri interface uzerinde bandwithi dolduracak kadar
    > traffic var. uzerindeki musteriler traffic cekmiyorken
    > nasıl oluyorda full trafic cekiyor anlayamadim.
    > aslinda ustunde ospf ve bgp calisiyor ama o kadar
    > traffic olusturmasi mumkun mu? ospf ve bgpinin
    > yarattigi trafigi gormenin bir yolu varmi? router
    > as5300 ustunde dedigim gibi ospf, bgp, mpls calisiyor
    > 3 tane musteri var. o kadar. dial-up modemleri pek
    > kullanilmiyor , iosuda 12.3(10).
    >
    > iyi calismalar..
    >
    >
    >
    > __________________________________
    > Do you Yahoo!?
    > Yahoo! Mail - 250MB free storage. Do more. Manage less.
    > [url]http://info.mail.yahoo.com/mail_250[/url]
    >
    >
    >
    > Bu listenin Cisco Systems ile herhangi bir baglantisi bulunmamaktadir.
    >
    > Listeden cikmak için [email][email protected][/email] adresine bir
    [/color]
    e-posta gönderebilirsiniz.[color=blue]
    > Yahoo! Groups Links
    >
    >
    >
    >
    >
    >[/color]



    Bu listenin Cisco Systems ile herhangi bir baglantisi bulunmamaktadir.

    Listeden cikmak için [email][email protected][/email] adresine bir
    e-posta gönderebilirsiniz.
    Yahoo! Groups Links












    ----
    This email is intended for the named recipient only. It may contain information which is confidential, commercially sensitive, or copyright. If you are not the intended recipient you must not reproduce or distribute any part of the email, disclose its contents, or take any action in reliance. If youhave received this email in error, please contact the sender and delete the message. It is your responsibility to scan this email and any attachmentsfor viruses and other defects.
    To the extent permitted by law, Zurich and its associates will not be liable for any loss or damage arising in any way from this communication including any file attachments. We may monitor email you send to us, either as a reply to this email or any email you send to us, to confirm our systems are protected and for compliance with company policies. Although we take reasonable precautions to protect the confidentiality of our email systems, we donot warrant the confidentiality or security of email or attachments we receive.

    [Non-text portions of this message have been removed]



    ------------------------ Yahoo! Groups Sponsor --------------------~-->
    $4.98 domain names from Yahoo!. Register anything.
    [url]http://us.click.yahoo.com/Q7_YsB/neXJAA/yQLSAA/26EolB/TM[/url]
    --------------------------------------------------------------------~->

    Bu listenin Cisco Systems ile herhangi bir baglantisi bulunmamaktadir.

    Listeden cikmak için [email][email protected][/email] adresine bir e-posta gönderebilirsiniz.
    Yahoo! Groups Links

    <*> To visit your group on the web, go to:
    [url]http://groups.yahoo.com/group/cisco-ttl/[/url]

    <*> To unsubscribe from this group, send an email to:
    [email][email protected][/email]

    <*> Your use of Yahoo! Groups is subject to:
    [url]http://docs.yahoo.com/info/terms/[/url]






+ Konuyu Cevapla

Bu Konuyu Paylaşın !

Bu Konuyu Paylaşın !

Yetkileriniz

  • Konu Acma Yetkiniz Yok
  • Cevap Yazma Yetkiniz Yok
  • Eklenti Yükleme Yetkiniz Yok
  • Mesajınızı Değiştirme Yetkiniz Yok