Cisco Router AUX Port Config
CLI Guru - Cisco Eğitim ve Danışmanlık Merkezi |

+ Konuyu Cevapla
Toplam 2 sonuçtan 1 ile 2 arasındakiler gösteriliyor.
Cisco Router AUX Port Config

Arkadaşlar gönderdiğiniz configurasyonları denedim ama hiçbir şekilde modem aramayı yapmıyor debuglarına baktığım zaman chat script ler aktif hale geçiyor ama en sonunda connecting timeout ohatası veriyor 00:17:33: As5 DDR: No

  1. #1
    huseyin Guest

    Standart Cisco Router AUX Port Config

    Arkadaşlar gönderdiğiniz configurasyonları denedim ama hiçbir şekilde
    modem aramayı yapmıyor debuglarına baktığım zaman chat script ler aktif
    hale geçiyor ama en sonunda connecting timeout ohatası veriyor







    00:17:33: As5 DDR: No holdq created - not configured

    00:17:33: As5 DDR: Attempting to dial test

    00:17:33: CHAT5: Attempting async line dialer script

    00:17:33: CHAT5: Dialing using Modem script: test & System script: none

    00:17:33: As5 DDR: Increment call, 0

    00:17:33: IP: s=10.1.1.1 (local), d=195.155.3.3 (Async5), len 100,
    encapsulation failed

    00:17:33: CHAT5: process started

    00:17:33: CHAT5: Asserting DTR

    00:17:33: TTY5: Set DTR to 1

    00:17:33: CHAT5: Chat script test started

    00:17:33: CHAT5: Sending string: at&fs0=1&c1&d3&h1&r2&b1&m4&k1&w

    00:17:33: CHAT5: Expecting string: OK.

    00:17:35: crm_send_periodic_update

    00:17:35: Serial0: attempting to restart

    00:17:35: IP: s=10.1.1.1 (local), d=195.155.3.3 (Async5), len 100,
    sending

    00:17:35: As5 DDR: ip (s=10.1.1.1, d=195.155.3.3), 100 bytes, outgoing
    interesting (ip PERMIT)

    00:17:35: DDR: 45000064 00600000 FF01E998 0A010101 C39B0303 08004EEA

    00:17:35: DDR: 00801278 00000000 00101C58 ABCDABCD ABCDABCD ABCDABCD

    00:17:35: IP: s=10.1.1.1 (local), d=195.155.3.3 (Async5), len 100,
    encapsulation failed.

    00:17:37: IP: s=10.1.1.1 (local), d=195.155.3.3 (Async5), len 100,
    sending

    00:17:37: As5 DDR: ip (s=10.1.1.1, d=195.155.3.3), 100 bytes, outgoing
    interesting (ip PERMIT)

    00:17:37: DDR: 45000064 00610000 FF01E997 0A010101 C39B0303 08004719

    00:17:37: DDR: 00811278 00000000 00102428 ABCDABCD ABCDABCD ABCDABCD

    00:17:37: IP: s=10.1.1.1 (local), d=195.155.3.3 (Async5), len 100,
    encapsulation failed

    00:17:38: is_up: 0 state: 0 sub state: 1 line: 0 has_route: False.

    00:17:38: CHAT5: Timeout expecting: OK

    00:17:38: CHAT5: Chat script test finished, status = Connection timed
    out; remote host not responding

    00:17:38: AAA/ID(00000000): Could not set Disconnect Cause: Abort = 38,
    Terminate = 9

    00:17:38: TTY5: Line reset by "Async dialer"

    00:17:38: Async5: Async Interface dial-out failure

    00:17:38: As5 DDR: disconnecting call

    00:17:38: As5 DDR: Decrement call, 1

    00:17:38: TTY5: Modem: (unknown)->HANGUP

    00:17:38: TTY5: no timer type 0 to destroy

    00:17:38: TTY5: no timer type 1 to destroy

    00:17:38: TTY5: no timer type 3 to destroy

    00:17:38: TTY5: no timer type 4 to destroy

    00:17:38: TTY5: no timer type 2 to destroy

    00:17:39: AAA/ID(00000000): Could not set Disconnect Cause: Abort = 7,
    Terminate = 2

    00:17:39: TTY5: dropping DTR, hanging up

    00:17:39: TTY5: Set DTR to 0

    00:17:39: tty5: Modem: HANGUP->IDLE

    00:17:39: IP: s=10.1.1.1 (local), d=195.155.3.3, len 100, unroutable.

    00:17:41: IP: s=10.1.1.1 (local), d=195.155.3.3, len 100,
    unroutablePQUICC_FEC(0/0): PHY 0 Read reg = 0 val = 1000

    PQUICC_FEC(0/0): PHY 0 Read reg = 11 val = 100

    PQUICC_FEC(0/0): PHY 0 Read reg = 11 val = 100



    00:17:41: %PQUICC_FE-5-LOSTCARR: PQUICC/FE(0/0), Lost carrier.
    Transceiver problem?.

    Success rate is 0 percent (0/5)

    Router#

    00:17:44: TTY5: restoring DTR

    00:17:44: TTY5: Set DTR to 1

    00:17:48: As5 DDR: re-enable timeout

    00:17:48: As5 DDR: dialer cannot dialPQUICC_FEC(0/0): PHY 0 Read reg =
    0 val = 1000

    PQUICC_FEC(0/0): PHY 0 Read reg = 11 val = 100

    PQUICC_FEC(0/0): PHY 0 Read reg = 11 val = 100



    00:17:51: %PQUICC_FE-5-LOSTCARR: PQUICC/FE(0/0), Lost carrier.
    Transceiver problem?PQUICC_FEC(0/0): PHY 0 Read reg = 0 val = 1000

    PQUICC_FEC(0/0): PHY 0 Read reg = 11 val = 100

    PQUICC_FEC(0/0): PHY 0 Read reg = 11 val = 100



    00:18:01: %PQUICC_FE-5-LOSTCARR: PQUICC/FE(0/0), Lost carrier.
    Transceiver problem?

    00:18:05: crm_send_periodic_update

    00:18:05: Serial0: attempting to restart

    00:18:06: IP-Static: 0.0.0.0 0.0.0.0 Async5 Path = 1, route table no
    change, recursive flag clear

    00:18:06: IP-Static: 0.0.0.0 0.0.0.0 Serial0 Path =

    00:18:06: IP-ST: if_list try 2

    00:18:06: IP-ST: gw_list total 0, try 0, completed list TRUE

    00:18:06: IP-Static: all_list, time elapsed 0 ms

    00:18:08: is_up: 0 state: 0 sub state: 1 line: 0 has_route: False

    00:18:09: DHCPD: checking for expired leases.nod PQUICC_FEC(0/0): PHY 0
    Read reg = 0 val = 1000

    PQUICC_FEC(0/0): PHY 0 Read reg = 11 val = 100

    PQUICC_FEC(0/0): PHY 0 Read reg = 11 val = 100



  2. #2
    Devrim Yener KUCUK Guest

    Standart re: Cisco Router AUX Port Config

    Merhaba

    Sorun burada,
    00:17:33: CHAT5: Sending string: at&fs0=1&c1&d3&h1&r2&b1&m4&k1&w

    00:17:33: CHAT5: Expecting string: OK.

    .....

    00:17:38: CHAT5: Timeout expecting: OK

    00:17:38: CHAT5: Chat script test finished, status = Connection timed out; remote host not responding



    Goruldugu 5 saniye bekliyor , timeout oluyor





    External modem " Expect and Send Pairs " mantigi ile calisir.

    Yani her gonderilen string icin modemden cevap bekler router.

    [url]www.cisco.com[/url] da "modem script execution" diye arama yapilirsa daha detayli bilgi bulunabilir



    Iki sey tavsiye ediyorum

    1- Modeme reverse telnet yapin, ve AT komutunu deneyin, modem "OK" ile cevap veriyor mu?

    Vermiyorsa modemin settinglerinden modemin AT ye OK ile cevap vermesini saglayin



    2- Kullanilan modemin chat scripti dogru olmali, dogru degilse, modem seviyesinden sonra PPP de corrupted paketlerle karsilasilmasi ve TIMEOUT alinmasi olasi.



    Yine calismazsa, en son sh ver/sh run ve debuglari gonderin bakalim



    Not: subject kismina kullandiginiz platform ve IOSu de yazarsaniz daha cabuk bakabiliriz.



    Kolay gelsin.



    Devrim




    ----- Original Message -----
    From: huseyin
    To: [email][email protected][/email]
    Sent: Wednesday, September 01, 2004 9:20 AM
    Subject: [cisco-ttl] aux


    Arkadaşlar gönderdiğiniz configurasyonları denedim ama hiçbir şekilde modem aramayı yapmıyor debuglarına baktığım zaman chat script ler aktif hale geçiyor ama en sonunda connecting timeout ohatası veriyor







    00:17:33: As5 DDR: No holdq created - not configured

    00:17:33: As5 DDR: Attempting to dial test

    00:17:33: CHAT5: Attempting async line dialer script

    00:17:33: CHAT5: Dialing using Modem script: test & System script: none

    00:17:33: As5 DDR: Increment call, 0

    00:17:33: IP: s=10.1.1.1 (local), d=195.155.3.3 (Async5), len 100, encapsulation failed

    00:17:33: CHAT5: process started

    00:17:33: CHAT5: Asserting DTR

    00:17:33: TTY5: Set DTR to 1

    00:17:33: CHAT5: Chat script test started

    00:17:33: CHAT5: Sending string: at&fs0=1&c1&d3&h1&r2&b1&m4&k1&w

    00:17:33: CHAT5: Expecting string: OK.

    00:17:35: crm_send_periodic_update

    00:17:35: Serial0: attempting to restart

    00:17:35: IP: s=10.1.1.1 (local), d=195.155.3.3 (Async5), len 100, sending

    00:17:35: As5 DDR: ip (s=10.1.1.1, d=195.155.3.3), 100 bytes, outgoing interesting (ip PERMIT)

    00:17:35: DDR: 45000064 00600000 FF01E998 0A010101 C39B0303 08004EEA

    00:17:35: DDR: 00801278 00000000 00101C58 ABCDABCD ABCDABCD ABCDABCD

    00:17:35: IP: s=10.1.1.1 (local), d=195.155.3.3 (Async5), len 100, encapsulation failed.

    00:17:37: IP: s=10.1.1.1 (local), d=195.155.3.3 (Async5), len 100, sending

    00:17:37: As5 DDR: ip (s=10.1.1.1, d=195.155.3.3), 100 bytes, outgoing interesting (ip PERMIT)

    00:17:37: DDR: 45000064 00610000 FF01E997 0A010101 C39B0303 08004719

    00:17:37: DDR: 00811278 00000000 00102428 ABCDABCD ABCDABCD ABCDABCD

    00:17:37: IP: s=10.1.1.1 (local), d=195.155.3.3 (Async5), len 100, encapsulation failed

    00:17:38: is_up: 0 state: 0 sub state: 1 line: 0 has_route: False.

    00:17:38: CHAT5: Timeout expecting: OK

    00:17:38: CHAT5: Chat script test finished, status = Connection timed out; remote host not responding

    00:17:38: AAA/ID(00000000): Could not set Disconnect Cause: Abort = 38,Terminate = 9

    00:17:38: TTY5: Line reset by "Async dialer"

    00:17:38: Async5: Async Interface dial-out failure

    00:17:38: As5 DDR: disconnecting call

    00:17:38: As5 DDR: Decrement call, 1

    00:17:38: TTY5: Modem: (unknown)->HANGUP

    00:17:38: TTY5: no timer type 0 to destroy

    00:17:38: TTY5: no timer type 1 to destroy

    00:17:38: TTY5: no timer type 3 to destroy

    00:17:38: TTY5: no timer type 4 to destroy

    00:17:38: TTY5: no timer type 2 to destroy

    00:17:39: AAA/ID(00000000): Could not set Disconnect Cause: Abort = 7, Terminate = 2

    00:17:39: TTY5: dropping DTR, hanging up

    00:17:39: TTY5: Set DTR to 0

    00:17:39: tty5: Modem: HANGUP->IDLE

    00:17:39: IP: s=10.1.1.1 (local), d=195.155.3.3, len 100, unroutable.

    00:17:41: IP: s=10.1.1.1 (local), d=195.155.3.3, len 100, unroutablePQUICC_FEC(0/0): PHY 0 Read reg = 0 val = 1000

    PQUICC_FEC(0/0): PHY 0 Read reg = 11 val = 100

    PQUICC_FEC(0/0): PHY 0 Read reg = 11 val = 100



    00:17:41: %PQUICC_FE-5-LOSTCARR: PQUICC/FE(0/0), Lost carrier. Transceiver problem?.

    Success rate is 0 percent (0/5)

    Router#

    00:17:44: TTY5: restoring DTR

    00:17:44: TTY5: Set DTR to 1

    00:17:48: As5 DDR: re-enable timeout

    00:17:48: As5 DDR: dialer cannot dialPQUICC_FEC(0/0): PHY 0 Read reg =0 val = 1000

    PQUICC_FEC(0/0): PHY 0 Read reg = 11 val = 100

    PQUICC_FEC(0/0): PHY 0 Read reg = 11 val = 100



    00:17:51: %PQUICC_FE-5-LOSTCARR: PQUICC/FE(0/0), Lost carrier. Transceiver problem?PQUICC_FEC(0/0): PHY 0 Read reg = 0 val = 1000

    PQUICC_FEC(0/0): PHY 0 Read reg = 11 val = 100

    PQUICC_FEC(0/0): PHY 0 Read reg = 11 val = 100



    00:18:01: %PQUICC_FE-5-LOSTCARR: PQUICC/FE(0/0), Lost carrier. Transceiver problem?

    00:18:05: crm_send_periodic_update

    00:18:05: Serial0: attempting to restart

    00:18:06: IP-Static: 0.0.0.0 0.0.0.0 Async5 Path = 1, route table no change, recursive flag clear

    00:18:06: IP-Static: 0.0.0.0 0.0.0.0 Serial0 Path =

    00:18:06: IP-ST: if_list try 2

    00:18:06: IP-ST: gw_list total 0, try 0, completed list TRUE

    00:18:06: IP-Static: all_list, time elapsed 0 ms

    00:18:08: is_up: 0 state: 0 sub state: 1 line: 0 has_route: False

    00:18:09: DHCPD: checking for expired leases.nod PQUICC_FEC(0/0): PHY 0 Read reg = 0 val = 1000

    PQUICC_FEC(0/0): PHY 0 Read reg = 11 val = 100

    PQUICC_FEC(0/0): PHY 0 Read reg = 11 val = 100

+ Konuyu Cevapla

Bu Konuyu Paylaşın !

Bu Konuyu Paylaşın !

Yetkileriniz

  • Konu Acma Yetkiniz Yok
  • Cevap Yazma Yetkiniz Yok
  • Eklenti Yükleme Yetkiniz Yok
  • Mesajınızı Değiştirme Yetkiniz Yok