CCNP ( Cisco Certified Network Professional ) Sınav içerikleri ( 2007 ) CCNP Sinavlari 2007 yili itibariyle degisti. Yeni sinavlarin icerikleri aşağıdadır. "Building Scalable Cisco Internetworks " BSCI (642-901) Implement EIGRP operations.- Explain the functions and operations of EIGRP (e.g., DUAL).
- Configure EIGRP routing. (e.g., Stub Routing, authentication, etc.)
- Verify or troubleshoot EIGRP routing configurations.
Implement multiarea OSPF operations.- Explain the functions and operations of multiarea OSPF.
- Configure multiarea OSPF routing. (e.g., Stub, NSSA, authentication, etc.)
- Verify or troubleshoot multiarea OSPF routing configurations.
Describe integrated IS-IS.- Describe the features and benefits of integrated IS-IS.
- Configure and verify integrated IS-IS.
Implement Cisco IOS routing features.- Describe, configure or verify route redistribution between IP routing IGPs. (e.g., route-maps, default routes, etc.)
- Describe, configure or verify route filtering (i.e., distribute-lists and passive interfaces).
- Describe and configure DHCP services (e.g., Server, Client, IP helper address, etc.).
Implement BGP for enterprise ISP connectivity- Describe the functions and operations of BGP.
- Configure or verify BGP operation in a non-transit AS (e.g., authentication).
- Configure BGP path selection. (i.e., Local Preference, AS Path, Weight or MED attributes).
Implement multicast forwarding.- Describe IP Multicast (e.g., Layer-3 to Layer-2 mapping, IGMP, etc.).
- Describe, configure, or verify IP multicast routing (i.e., PIM Sparse-Dense Mode).
Implement IPv6.- Describe IPv6 addressing operations.
- Describe IPv6 interoperation with IPv4.
- Describe, configure or verify OSPF routing with IPv6 addressing.
------------------------------------------------------------------------------------------------------------------------- "Implementing Secure Converged Wide Area Networks" ISCW (642-825) Implement basic teleworker services.- Describe Cable (HFC) technologies.
- Describe xDSL technologies.
- Configure ADSL (i.e., PPPoE or PPPoA).
- Verify basic teleworker configurations.
Implement Frame-Mode MPLS.- Describe the components and operation of Frame-Mode MPLS (e.g., packet-based MPLS VPNs).
- Configure and verify Frame-Mode MPLS.
Implement a site-to-site IPSec VPN- Describe the components and operations of IPSec VPNs and GRE Tunnels.
- Configure a site-to-site IPSec VPN/GRE Tunnel with SDM (i.e., preshared key).
- Verify IPSec/GRE Tunnel configurations (i.e., IOS CLI configurations).
- Describe, configure, and verify VPN backup interfaces.
- Describe and configure Cisco Easy VPN solutions using SDM.
Describe network security strategies.- Describe and mitigate common network attacks (i.e., Reconnaissance, Access, and Denial of Service).
- Describe and mitigate Worm, Virus, and Trojan Horse attacks.
- Describe and mitigate application-layer attacks (e.g., management protocols).
Implement Cisco Device Hardening- Describe, Configure, and verify AutoSecure/One-Step Lockdown implementations (i.e., CLI and SDM).
- Describe, configure, and verify AAA for Cisco Routers.
- Describe and configure IOS secure management features (e.g., SSH, SNMP, SYSLOG, NTP, Role-Based CLI, etc.)
Implement Cisco IOS firewall.- Describe the functions and operations of Cisco IOS Firewall (e.g., Stateful Firewall, CBAC, etc.).
- Configure Cisco IOS Firewall with SDM.
- Verify Cisco IOS Firewall configurations (i.e., IOS CLI configurations, SDM Monitor).
Describe and configure Cisco IOS IPS.- Describe the functions and operations of IDS and IPS systems (e.g., IDS/IPS signatures, IPS Alarms, etc.)
- Configure Cisco IOS IPS using SDM.
------------------------------------------------------------------------------------------------------------------------- "Building Cisco Multilayer Switched Networks " BCMSN (642-812) Implement VLANs.- Explain the functions of VLANs in a hierarchical network.
- Configure VLANs (e.g., Native, Default, Static and Access).
- Explain and configure VLAN trunking (i.e., IEEE 802.1Q and ISL).
- Explain and configure VTP.
- Verify or troubleshoot VLAN configurations.
Conduct the operation of Spanning Tree protocols in a hierarchical network.- Explain the functions and operations of the Spanning Tree protocols (i.e., RSTP, PVRST, MISTP).
- Configure RSTP (PVRST) and MISTP.
- Describe and configure STP security mechanisms (i.e., BPDU Guard, BPDU Filtering, Root Guard).
- Configure and Verify UDLD and Loop Guard.
- Verify or troubleshoot Spanning Tree protocol operations.
- Configure and verify link aggregation using PAgP or LACP.
Implement Inter-VLAN routing.- Explain and configure Inter-VLAN routing (i.e., SVI and routed ports).
- Explain and enable CEF operation.
- Verify or troubleshoot InterVLAN routing configurations.
Implement gateway redundancy technologies.- Explain the functions and operations of gateway redundancy protocols (i.e., HSRP, VRRP, and GLBP).
- Configure HSRP, VRRP, and GLBP.
- Verify High Availability configurations.
Describe and configure wireless client access.- Describe the components and operations of WLAN topologies (i.e., AP and Bridge).
- Describe the features of Client Devices, Network Unification, and Mobility Platforms (i.e., CCX, LWAPP).
- Configure a wireless client (i.e., ADU).
Describe and configure security features in a switched network.- Describe common Layer 2 network attacks
- Explain and configure Port Security,802.1x, VACLs, Private VLANs, DHCP Snooping, and DAI.
- Verify Catalyst switch (IOS-based) security configurations
Configure support for voice.- Describe the characteristics of voice in the campus network.
- Describe the functions of Voice VLANs and trust boundaries.
- Configure and verify basic IP Phone support
------------------------------------------------------------------------------------------------------------------------- " Optimizing Converged Cisco Networks" ONT (642-845) Describe Cisco VoIP implementations.- Describe the functions and operations of a VoIP network (e.g., packetization, bandwidth considerations, CAC, etc.).
- Describe and identify basic voice components in an enterprise network (e.g. Gatekeepers, Gateways, etc.)
Describe QoS considerations.- Explain the necessity of QoS in converged networks (e.g., bandwidth, delay, loss, etc.).
- Describe strategies for QoS implementations (e.g. QoS Policy, QoS Models, etc.).
Describe DiffServ QoS implementations.- Describe classification and marking (e.g., CoS, ToS, IP Precedence, DSCP, etc.).
- Describe and configure NBAR for classification.
- Explain congestion management and avoidance mechanisms (e.g., FIFO, PQ, WRR, WRED, etc.).
- Describe traffic policing and traffic shaping (i.e., traffic conditioners).
- Describe Control Plane Policing.
- Describe WAN link efficiency mechanisms (e.g., Payload/Header Compression, MLP with interleaving, etc.).
- Describe and configure QoS Pre-Classify.
Implement AutoQoS.- Explain the functions and operations of AutoQoS.
- Describe the SDM QoS Wizard.
- Configure, verify, and torubleshoot AutoQoS implementations (i.e., MQC).
Implement WLAN security and management.- Describe and Configure wireless security on Cisco Clients and APs (e.g., SSID, WEP, LEAP, etc.).
- Describe basic wireless management (e.g., WLSE and WCS). Configure and verify basic WCS configuration (i.e., login, add/review controller/AP status, security, and import/review maps).
- Describe and configure WLAN QoS.
__________________
Cisco Certified Network Engineer
|